[Bioc-devel] EXTERNAL: Re: Cannot move 'xps' to GIT

I have just seen the update 2017-10-15 of the BUILD/CHECK report:

 ?http://bioconductor.org/checkResults/devel/bioc-LATEST/xps/

which was not available when I have sent my former mail.

For some reason my commit to version xps_1.37.2 was not accepted.

Please tell me what I need to do to solve this problem.

Best regards,
Christian



On 10/15/17 21:37, cstrato wrote:

Hi,

Since 'https://github.com/cstrato/xps' does only contain information 
how to create or push a repository I tried to follow again:


http://master.bioconductor.org/developers/how-to/git/push-to-github-bioc/


2. View existing remotes
$ git remote -v
origin? git at github.com:cstrato/xps.git (fetch)
origin? git at github.com:cstrato/xps.git (push)
upstream??????? git at git.bioconductor.org:packages/xps.git (fetch)
upstream??????? git at git.bioconductor.org:packages/xps.git (push)


3. Make and commit changes to the master branch
$ git checkout master
M?????? DESCRIPTION
M?????? NEWS
M?????? configure.in
Already on 'master'
Your branch is up-to-date with 'origin/master'.
# edit files, etc.
$ git add -v DESCRIPTION
$ git add -v NEWS
$ git add -v configure.in



When running 'commit' I got the following information, which is not 
clear to me:

$ git commit -m "update for configure.in"
[master 7a9855f] update for configure.in
??Committer: rabbitus <rabbitus at lumimacs-iMac.local>
Your name and email address were configured automatically based
on your username and hostname. Please check that they are accurate.
You can suppress this message by setting them explicitly. Run the
following command and follow the instructions in your editor to edit
your configuration file:

???? git config --global --edit

After doing this, you may fix the identity used for this commit with:

???? git commit --amend --reset-author

??3 files changed, 62 insertions(+), 58 deletions(-)



So I tried:

$ git config --global --edit
# This is Git's per-user configuration file.
[user]
# Please adapt and uncomment the following lines:
#?????? name = rabbitus
#?????? email = rabbitus at lumimacs-iMac.local


and changed the '.gitconfig' file to:
# This is Git's per-user configuration file.
[user]
# Please adapt and uncomment the following lines:
#?????? name = cstrato
#?????? email = cstrato at aon.at



It is not clear to me whether I have to change my name/email or keep 
the original one.

Could you tell me which one should be the correct one?



Then I did run:

$ git commit --amend --reset-author
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
#
# Committer: rabbitus <rabbitus at lumimacs-iMac.local>
#
# On branch master
# Your branch is ahead of 'origin/master' by 1 commit.
#?? (use "git push" to publish your local commits)
#
# Changes to be committed:
#?????? modified:?? DESCRIPTION
#?????? modified:?? NEWS
#?????? modified:?? configure.in


In this case I did not change anything, since I am not sure what it 
means.

Can you explain what this means, since 
'https://git-scm.com/docs/git-commit' did not help me.

Should I change this file?



Then I did steps 5 and 6 and got the following:

5. Push updates to GitHub's (origin) master branch
$ git push origin master
Permission denied (publickey).
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.


6. Next, push updates to Bioconductor's (upstream) master branch
$ git push upstream master
Enter passphrase for key '/Users/rabbitus/.ssh/id_rsa':
Counting objects: 5, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (5/5), done.
Writing objects: 100% (5/5), 727 bytes | 0 bytes/s, done.
Total 5 (delta 4), reused 0 (delta 0)
To git.bioconductor.org:packages/xps.git
??? d63ffaf..d83779f? master -> master



Finally I did:

$ ssh -v git at git.bioconductor.org/packages/xps
OpenSSH_7.4p1, LibreSSL 2.5.0
debug1: Reading configuration data /Users/rabbitus/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
ssh: Could not resolve hostname git: nodename nor servname provided, 
or not known


However, now I get only an ssh error message:


Do you know what I did wrong this time?


Thank you.
Best regards,
Christian


On 10/13/17 20:12, Turaga, Nitesh wrote:

Hi,

Both your `origin` and `upstream` are set to the same location i.e 
git at git.bioconductor.org:packages/xps.

This is wrong. You want your origin to point to 
`git at github.com:cstrato/xps`

You can do this by following the commands,

????`git remote set-url origin git at github.com:cstrato/xps.git`

????`git push origin master`

All of this documentation is given in 
bioconductor.org/developers/how-to/git/.

Best,

Nitesh

On Oct 13, 2017, at 2:07 PM, cstrato <cstrato at aon.at> wrote:

Dear Martin,

Following your advice

?? https://bioconductor.org/developers/how-to/git/maintain-github-bioc/

I did the following:

$ cd xps
$ git remote add upstream git at git.bioconductor.org:packages/xps.git
$ git fetch upstream
Enter passphrase for key '/Users/rabbitus/.ssh/id_rsa':
?From git.bioconductor.org:packages/xps
* [new branch]????? RELEASE_2_10 -> upstream/RELEASE_2_10
* [new branch]????? RELEASE_2_11 -> upstream/RELEASE_2_11
* [new branch]????? RELEASE_2_12 -> upstream/RELEASE_2_12
* [new branch]????? RELEASE_2_13 -> upstream/RELEASE_2_13
* [new branch]????? RELEASE_2_14 -> upstream/RELEASE_2_14
* [new branch]????? RELEASE_2_2 -> upstream/RELEASE_2_2
* [new branch]????? RELEASE_2_3 -> upstream/RELEASE_2_3
* [new branch]????? RELEASE_2_4 -> upstream/RELEASE_2_4
* [new branch]????? RELEASE_2_5 -> upstream/RELEASE_2_5
* [new branch]????? RELEASE_2_6 -> upstream/RELEASE_2_6
* [new branch]????? RELEASE_2_7 -> upstream/RELEASE_2_7
* [new branch]????? RELEASE_2_8 -> upstream/RELEASE_2_8
* [new branch]????? RELEASE_2_9 -> upstream/RELEASE_2_9
* [new branch]????? RELEASE_3_0 -> upstream/RELEASE_3_0
* [new branch]????? RELEASE_3_1 -> upstream/RELEASE_3_1
* [new branch]????? RELEASE_3_2 -> upstream/RELEASE_3_2
* [new branch]????? RELEASE_3_3 -> upstream/RELEASE_3_3
* [new branch]????? RELEASE_3_4 -> upstream/RELEASE_3_4
* [new branch]????? RELEASE_3_5 -> upstream/RELEASE_3_5
* [new branch]????? master???? -> upstream/master
$ git fetch upstream
Enter passphrase for key '/Users/rabbitus/.ssh/id_rsa':
$ git merge upstream/master
Already up-to-date.
$ git push origin master
Enter passphrase for key '/Users/rabbitus/.ssh/id_rsa':
Everything up-to-date
$ git remote -v
origin? git at git.bioconductor.org:packages/xps (fetch)
origin? git at git.bioconductor.org:packages/xps (push)
upstream??????? git at git.bioconductor.org:packages/xps.git (fetch)
upstream??????? git at git.bioconductor.org:packages/xps.git (push)
$ git checkout master
M?????? DESCRIPTION
M?????? NEWS
M?????? configure.in
Already on 'master'
Your branch is up-to-date with 'origin/master'.
$ git add -v DESCRIPTION
add 'DESCRIPTION'
$ git add -v NEWS
add 'NEWS'
$ git add -v configure.in
add 'configure.in'
$ git push origin master
Enter passphrase for key '/Users/rabbitus/.ssh/id_rsa':
Everything up-to-date
$ git push upstream master
Enter passphrase for key '/Users/rabbitus/.ssh/id_rsa':
Everything up-to-date


I hope that I could commit my changes and my development version on

?? https://github.com/cstrato/xps

will be updated to 'xps_1.37.2'


(PS: my repository https://github.com/cstrato/xps is still empty)

Thank you very much for your help.
Best regards,
Christian


On 10/12/17 23:21, Martin Morgan wrote:

On 10/12/2017 04:13 PM, cstrato wrote:

Dear Martin,

Thank you for your informative reply.

1, My SSH public key that you mentioned is the correct one.



2, After following your advice and running

??? ssh -v git at git.bioconductor.org

I got:

OpenSSH_7.4p1, LibreSSL 2.5.0
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Connecting to git.bioconductor.org [34.192.48.227] port 22.
debug1: Connection established.
debug1: identity file /Users/rabbitus/.ssh/id_rsa type 1
debug1: key_load_public: No such file or directory
...
debug1: Remote: PTY allocation disabled.
PTY allocation request failed on channel 0
hello c.stratowa, this is git at ip-172-30-0-33 running gitolite3 
v3.6.6-6-g7c8f0ab on git 2.13.0
...
bash: debug1:: command not found



3, Nevertheless, I could run:

??? git clone git at git.bioconductor.org:packages/xps

I got:
Cloning into 'xps'...
Enter passphrase for key '/Users/rabbitus/.ssh/id_rsa':
remote: Counting objects: 2757, done.
remote: Compressing objects: 100% (2741/2741), done.
remote: Total 2757 (delta 2077), reused 0 (delta 0)
Receiving objects: 100% (2757/2757), 5.62 MiB | 945.00 KiB/s, done.
Resolving deltas: 100% (2077/2077), done.
Checking connectivity... done.

?From the Bioconductor perspective, I think you are 'good to go', 
and you could follow, e.g.,
???? http://bioconductor.org/developers/how-to/git/maintain-bioc-only/
to commit and push changes to the Bioconductor git repository. 
These changes would be incorporated into the nightly builds, etc., 
as before.

4, In 'https://github.com/settings/keys' I deleted the old SSH key 
and tried to add a new SSH key, where in 'Key' I copied once again 
my public 'id_rsa'. However, once again I received an email with 
the wrong key 'df:2d:78:4f:**'

This is the 'fingerprint' of the SSH public key, rather than the 
public key itself.

I do not understand why my correct key is not accepted.

According to 'https://caius.github.io/github_id/' my user id is:
cstrato is github user #32616897

My public key at 'https://github.com/cstrato.keys' is still empty.

I don't know the answer to this github question; maybe public keys 
are not displayed by default? At any rate it 'does not matter'; 
github allows you to clone via https + password, or via ssh; all 
you need is to be able to clone your newly created, empty github 
xps repository, which it seems from below that you can.
It sounds like, now that you have access to git.bioconductor.org, 
you could follow
   
https://bioconductor.org/developers/how-to/git/maintain-github-bioc/
Martin

I am not sure what I need to do next?

Thank you.
Best regards,
Christian


On 10/12/17 19:40, Martin Morgan wrote:

On 10/08/2017 01:37 PM, cstrato wrote:

Dear all,

I wanted to update my package 'xps' and realized that I can no 
longer use 'svn commit'

In order to use GIT I did the following:


1, I created a public key '~/.ssh/id_rsa.pub'


2, I did submit my 'SSH public key or github id to 
Bioconductor', using the 'git/svn transition: ssh keys' form.

Here I entered my SVN user id, but it was not clear what my ID is.
So I checked 'svn info' and used? first my name 'c.stratowa' as 
SVN user id.
Since I did not succeed I repeated the procedure and used the 
UUID as SVN user id.

Is this correct, or how do I get my SVN user id?


3, I created a new GitHub repository:

https://github.com/cstrato/xps


4, Then I tried to clone the empty repository from GitHub. Here 
is the result:

iMac:GIT cstrato$ git clone https://github.com/cstrato/xps.git
Cloning into 'xps'...
warning: You appear to have cloned an empty repository.
Checking connectivity... done.
iMac:GIT cstrato$ git clone https://github.com/cstrato/xps.git
fatal: destination path 'xps' already exists and is not an empty 
directory.
iMac:GIT cstrato$ cd xps
iMac:xps cstrato$ git remote add upstream 
git at git.bioconductor.org:packages/xps.git
iMac:xps cstrato$ git fetch upstream
Permission denied (publickey).
fatal: Could not read from remote repository.

there's a single public key associated with access to xps, ending 
with

??? /m+bdjnFrDw5Fod8Sa9zDh2vXcICrNcxWGds2rbG3Q==

that should correspond to one of the public keys in your ~/.ssh/ 
directory. If not, resubmit the form with You can try

??? ssh -v git at git.bioconductor.org

and try to diagnosis why this public key is not being matched; a 
possibility is FAQ #15 where git is choosing the wrong key

??? https://bioconductor.org/developers/how-to/git/faq/

Please make sure you have the correct access rights
and the repository exists.


5, I realized that I needed to add my public key to:
https://github.com/settings/keys

The email I got was:
The following SSH key was added to your account:
iMac
df:2d:**:**:** etc

no, that doesn't look like an ssh key, it looks like a MAC address.

What's you're github user id? the link 
https://github.com/settings/keys is only useful to you. My public 
key is at https://github.com/mtmorgan.keys

If you believe this key was added in error, you can remove the 
key and disable access at the following location:
https://github.com/settings/keys


Now my questions are:

Do you think the SSH key should look as the one I got?

What did I do wrong?

Why do I get: permission denied?


Thank you.
Best regards,
Christian
_._._._._._._._._._._._._._._._._._
C.h.r.i.s.t.i.a.n?? S.t.r.a.t.o.w.a
V.i.e.n.n.a?????????? A.u.s.t.r.i.a
e.m.a.i.l:??????? cstrato at aon.at
_._._._._._._._._._._._._._._._._._

This email message may contain legally privileged and/or 
confidential information.? If you are not the intended 
recipient(s), or the employee or agent responsible for the 
delivery of this message to the intended recipient(s), you are 
hereby notified that any disclosure, copying, distribution, or 
use of this email message is prohibited.? If you have received 
this message in error, please notify the sender immediately by 
e-mail and delete this email message from your computer. Thank you.

This email message may contain legally privileged and/or 
confidential information.? If you are not the intended 
recipient(s), or the employee or agent responsible for the delivery 
of this message to the intended recipient(s), you are hereby 
notified that any disclosure, copying, distribution, or use of this 
email message is prohibited.? If you have received this message in 
error, please notify the sender immediately by e-mail and delete 
this email message from your computer. Thank you.

This email message may contain legally privileged and/or confidential 
information.? If you are not the intended recipient(s), or the 
employee or agent responsible for the delivery of this message to the 
intended recipient(s), you are hereby notified that any disclosure, 
copying, distribution, or use of this email message is prohibited.  
If you have received this message in error, please notify the sender 
immediately by e-mail and delete this email message from your 
computer. Thank you.