[Bioc-devel] non-conformable arrays

On Sun, Aug 9, 2020 at 6:57 AM Mikhail Dozmorov <
mikhail.dozmorov at gmail.com> wrote:

Thanks, Vincent. If I clone the Bioconductor version
from git at git.bioconductor.org:packages/HiCcompare, it builds
without errors. The version from
https://github.com/dozmorovlab/HiCcompare.git, which supposed to be
identical, errors as before - rcmdcheck::rcmdcheck() throws the same

"supposed to be identical" but no -- I checked out the one you mention
above, reproduced the error you report with R CMD *build* but
note that the versions in DESCRIPTION are different, and, for example

stvjc at stvjc-XPS-13-9300:~/BIOC_SOURCES/MIK/HiCcompare/R$ diff
hic_compare.R ~/BIOC_SOURCES/HiCcompare/R/hic_compare.R
99c99
<     A.min <- ceiling(mean(A_q10))
---

    A.min <- mean(A_q10) %>% ceiling()

perhaps there is a branch in your lab repo that needs to be checked out?



  Error: processing vignette 'HiCcompare-vignette.Rmd' failed with diagnostics:

non-conformable arrays
But the vignette builds using the "Knit" button.

I still don't understand what is going on. The MD5 sums for files in both
repositories are identical, except some in .git folder. I'll use the
Bioconductor version and we don't need to dig more since this version
works. Still, very strange situation.

Thanks again,
Mikhail

On Sat, Aug 8, 2020 at 7:12 AM Vincent Carey <stvjc at channing.harvard.edu>
wrote:

Hi Mikhail -- I cannot reproduce your problem.  I think I need more
details as to how
your error is triggered.  Using rcmdcheck::rcmdcheck within R as shown
in this transcript,
on the built tar.gz from the current git checkout master branch, I have

?? R CMD check results ?????????????????????????????????? HiCcompare
1.11.0 ????
Duration: 3m 11.5s

? checking installed package size ... NOTE
    installed size is  6.2Mb
    sub-directories of 1Mb or more:
      data   5.6Mb

? checking R code for possible problems ... NOTE
  .adjust_pval : <anonymous>: no visible binding for global variable
    ?p.adj?
  .adjust_pval : <anonymous>: no visible binding for global variable
    ?p.value?
  .adjust_pval: no visible binding for global variable ?p.value?
  .adjust_pval: no visible binding for global variable ?p.adj?
  .calc.diff.thresh: no visible global function definition for ?sd?
  .calc.pval: no visible binding for global variable ?D?
  .calc.pval: no visible binding for global variable ?p.value?
  .calc.pval: no visible binding for global variable ?p.adj?
  .calc.pval: no visible binding for global variable ?adj.M?
  .calc.pval: no visible binding for global variable ?fold.change?
  .calc.pval: no visible binding for global variable ?adj.IF2?
  .calc.pval: no visible binding for global variable ?adj.IF1?
  .calc_z2: no visible global function definition for ?sd?
  .calc_z2: no visible binding for global variable ?Z?
  .calc_z2: no visible global function definition for ?pnorm?
  .calc_z2: no visible binding for global variable ?p.value?
  .loess.matrix: no visible binding for global variable ?adj.IF1?
  .loess.matrix: no visible binding for global variable ?IF1?
  .loess.matrix: no visible binding for global variable ?adj.IF2?
  .loess.matrix: no visible binding for global variable ?IF2?
  .loess.matrix: no visible binding for global variable ?adj.M?
  .loess.matrix: no visible binding for global variable ?A?
  .sim.mat: no visible global function definition for ?head?
  .split_cent: no visible binding for global variable
    ?centromere_locations?
  .split_cent: no visible binding for global variable ?start1?
  .split_cent: no visible binding for global variable ?start2?
  .split_cent: no visible binding for global variable ?chr1?
  .split_cent: no visible binding for global variable ?chr2?
  MA_norm: no visible binding for global variable ?D?
  MA_norm: no visible binding for global variable ?M?
  MA_norm: no visible binding for global variable ?adj.IF1?
  MA_norm: no visible binding for global variable ?IF1?
  MA_norm: no visible binding for global variable ?adj.IF2?
  MA_norm: no visible binding for global variable ?IF2?
  MA_norm: no visible binding for global variable ?adj.M?
  cooler2sparse: no visible binding for global variable ?chr1?
  cooler2sparse: no visible binding for global variable ?chr2?
  cooler2sparse: no visible binding for global variable ?IF?
  create.hic.table: no visible binding for global variable ?D?
  create.hic.table: no visible binding for global variable ?region2?
  create.hic.table: no visible binding for global variable ?region1?
  create.hic.table: no visible binding for global variable ?IF2?
  create.hic.table: no visible binding for global variable ?M?
  create.hic.table: no visible binding for global variable ?IF1?
  create.hic.table: no visible binding for global variable ?i?
  create.hic.table: no visible binding for global variable ?j?
  filter_params: no visible binding for global variable ?M?
  filter_params: no visible binding for global variable ?IF1?
  filter_params: no visible binding for global variable ?IF2?
  filter_params: no visible global function definition for ?axis?
  full2sparse: no visible binding for global variable ?IF?
  hic_compare : <anonymous>: no visible binding for global variable
    ?p.adj?
  hic_simulate: no visible binding for global variable ?bias.slope?
  hic_simulate: no visible global function definition for ?na.omit?
  hicpro2bedpe: no visible binding for global variable ?chr1?
  hicpro2bedpe: no visible binding for global variable ?chr2?
  manhattan_plot: no visible binding for global variable ?bp?
  manhattan_plot: no visible binding for global variable ?count?
  sim.other.methods: no visible binding for global variable ?adj.IF1?
  sim.other.methods: no visible binding for global variable ?IF1?
  sim.other.methods: no visible binding for global variable ?adj.IF2?
  sim.other.methods: no visible binding for global variable ?IF2?
  sim.other.methods: no visible binding for global variable ?adj.M?
  sim.other.methods: no visible binding for global variable ?M?
  sim.other.methods: no visible global function definition for ?na.omit?
  sim_matrix: no visible binding for global variable ?bias.slope?
  total_sum: no visible binding for global variable ?IF2?
  total_sum: no visible binding for global variable ?M?
  total_sum: no visible binding for global variable ?IF1?
  total_sum: no visible binding for global variable ?chr1?
  volcano: no visible binding for global variable ?A?
  volcano: no visible binding for global variable ?adj.IF1?
  volcano: no visible binding for global variable ?adj.IF2?
  volcano: no visible binding for global variable ?p.value?
  volcano: no visible binding for global variable ?D?
  Undefined global functions or variables:
    A D IF IF1 IF2 M Z adj.IF1 adj.IF2 adj.M axis bias.slope bp
    centromere_locations chr1 chr2 count fold.change head i j na.omit
    p.adj p.value pnorm region1 region2 sd start1 start2
  Consider adding
    importFrom("graphics", "axis")
    importFrom("stats", "D", "na.omit", "pnorm", "sd")
    importFrom("utils", "head")
  to your NAMESPACE file.

0 errors ? | 0 warnings ? | 2 notes ?

sessionInfo()

R version 4.0.2 Patched (2020-07-19 r78892)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: Ubuntu 20.04 LTS (fossa-melisa X20)

Matrix products: default
BLAS:   /home/stvjc/R-4-0-dist/lib/R/lib/libRblas.so
LAPACK: /home/stvjc/R-4-0-dist/lib/R/lib/libRlapack.so

locale:
 [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C
 [3] LC_TIME=en_US.UTF-8        LC_COLLATE=en_US.UTF-8
 [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8
 [7] LC_PAPER=en_US.UTF-8       LC_NAME=C
 [9] LC_ADDRESS=C               LC_TELEPHONE=C
[11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base

other attached packages:
[1] rcmdcheck_1.3.3

loaded via a namespace (and not attached):
 [1] ps_1.3.3          fansi_0.4.1       prettyunits_1.1.1 withr_2.2.0

 [5] digest_0.6.25     crayon_1.3.4      rprojroot_1.3-2
assertthat_0.2.1
 [9] R6_2.4.1          backports_1.1.8   cli_2.0.2         callr_3.4.3

[13] desc_1.2.0        tools_4.0.2       glue_1.4.1
 compiler_4.0.2
[17] processx_3.4.3    xopen_1.0.0       pkgbuild_1.1.0

On Fri, Aug 7, 2020 at 7:08 PM Mikhail Dozmorov <
mikhail.dozmorov at gmail.com> wrote:

Dear Bioconductor team,

I am trying to update a package we developed, HiCcompare.
https://bioconductor.org/packages/HiCcompare/. The package has been
successfully submitted previously. However, now `R CMD check` throws an
error:
E> Quitting from lines 426-427 (HiCcompare-vignette.Rmd)
E> Error: processing vignette 'HiCcompare-vignette.Rmd' failed with
diagnostics:
E> non-conformable arrays
E> --- failed re-building ?HiCcompare-vignette.Rmd?

Yet, If I knit the vignette manually, it builds. If I execute the code
manually, it works. If I install the package from Bioconductor, it also
works.

I'm working with this package using
bioconductor/bioconductor_docker:devel.
But the strange behavior - vignette knits manually but fails in CMD
check -
persists both in Docker container and on local R installation.

Please advise, where to troubleshoot next.
Thanks,
Mikhail

---
Mikhail Dozmorov, Ph.D., Blick scholar
Associate Professor, Department of Biostatistics
Affiliate, Department of Pathology
Virginia Commonwealth University
OCS #738, 830 E. Main St, RVA, 23298
E-mail:  mikhail.dozmorov at vcuhealth.org
Phone: 804-827-2055
https://medschool.vcu.edu/expertise/detail.html?id=mdozmorov

        [[alternative HTML version deleted]]

The information in this e-mail is intended only for the person to whom
it is
addressed. If you believe this e-mail was sent to you in error and the
e-mail
contains patient information, please contact the Partners Compliance HelpLine
at
http://www.partners.org/complianceline . If the e-mail was sent to you
in error
but does not contain patient information, please contact the sender and
properly
dispose of the e-mail.

The information in this e-mail is intended only for th...{{dropped:16}}