Hello, I have a short question ? how do I figure the genome version for org.Dr.eg.db package? I couldn?t see it in the DESCRIPTION and also it?s not in org.Dr.eg_dbInfo() output. It would be nice to know if this is danRer11/GRCz11 or some other assembly, as there are coordinates present in the DB. Thank you, Gennady
[Bioc-devel] Question about org.Dr.eg.db package
6 messages · Margolin, Gennady (NIH/NICHD) [C], Vincent Carey, James W. MacDonald
This should probably be posed to the support site. What version of the package are you using? Where are you seeing coordinates? I would expect those to be obtained from the TxDb package, or perhaps from AnnotationHub.
columns(org.Dr.eg.db)
[1] "ACCNUM" "ALIAS" "ENSEMBL" "ENSEMBLPROT" "ENSEMBLTRANS" [6] "ENTREZID" "ENZYME" "EVIDENCE" "EVIDENCEALL" "GENENAME" [11] "GO" "GOALL" "IPI" "ONTOLOGY" "ONTOLOGYALL" [16] "PATH" "PFAM" "PMID" "PROSITE" "REFSEQ" [21] "SYMBOL" "UNIGENE" "UNIPROT" "ZFIN" On Thu, Aug 13, 2020 at 2:13 PM Margolin, Gennady (NIH/NICHD) [C] via
Bioc-devel <bioc-devel at r-project.org> wrote:
Hello,
I have a short question ? how do I figure the genome version for
org.Dr.eg.db package? I couldn?t see it in the DESCRIPTION and also it?s
not in org.Dr.eg_dbInfo() output. It would be nice to know if this is
danRer11/GRCz11 or some other assembly, as there are coordinates present in
the DB.
Thank you,
Gennady
[[alternative HTML version deleted]]
_______________________________________________ Bioc-devel at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/bioc-devel
The information in this e-mail is intended only for the ...{{dropped:18}}
Hi Vincent,
Thank you for responding.
Here is from the R documentation help page from this package (I have version 3.10.0 (I doubt anything changed with the latest one, which is 3.11.4)):
-------------------------------------------------
org.Dr.egCHRLOC {org.Dr.eg.db}
Entrez Gene IDs to Chromosomal Location
Description
org.Dr.egCHRLOC is an R object that maps entrez gene identifiers to the starting position of the gene. The position of a gene is measured as the number of base pairs.
The CHRLOCEND mapping is the same as the CHRLOC mapping except that it specifies the ending base of a gene instead of the start.
??
-------------------------------------------------
This output also does not show any genome version:
org.Dr.eg_dbInfo()
name value 1 DBSCHEMAVERSION 2.1 2 Db type OrgDb 3 Supporting package AnnotationDbi 4 DBSCHEMA ZEBRAFISH_DB 5 ORGANISM Danio rerio 6 SPECIES Zebrafish 7 EGSOURCEDATE 2019-Jul10 8 EGSOURCENAME Entrez Gene 9 EGSOURCEURL ftp://ftp.ncbi.nlm.nih.gov/gene/DATA 10 CENTRALID EG 11 TAXID 7955 12 GOSOURCENAME Gene Ontology 13 GOSOURCEURL ftp://ftp.geneontology.org/pub/go/godatabase/archive/latest-lite/ 14 GOSOURCEDATE 2019-Jul10 15 GOEGSOURCEDATE 2019-Jul10 16 GOEGSOURCENAME Entrez Gene 17 GOEGSOURCEURL ftp://ftp.ncbi.nlm.nih.gov/gene/DATA 18 KEGGSOURCENAME KEGG GENOME 19 KEGGSOURCEURL ftp://ftp.genome.jp/pub/kegg/genomes 20 KEGGSOURCEDATE 2011-Mar15 21 GPSOURCENAME UCSC Genome Bioinformatics (Danio rerio) 22 GPSOURCEURL 23 GPSOURCEDATE 2017-Nov1 24 ENSOURCEDATE 2019-Jun24 25 ENSOURCENAME Ensembl 26 ENSOURCEURL ftp://ftp.ensembl.org/pub/current_fasta 27 UPSOURCENAME Uniprot 28 UPSOURCEURL http://www.UniProt.org/ 29 UPSOURCEDATE Mon Oct 21 14:32:30 2019 From: Vincent Carey <stvjc at channing.harvard.edu> Date: Thursday, August 13, 2020 at 2:46 PM To: "Margolin, Gennady (NIH/NICHD) [C]" <gennady.margolin at nih.gov> Cc: "bioc-devel at r-project.org" <bioc-devel at r-project.org> Subject: Re: [Bioc-devel] Question about org.Dr.eg.db package This should probably be posed to the support site. What version of the package are you using? Where are you seeing coordinates? I would expect those to be obtained from the TxDb package, or perhaps from AnnotationHub.
columns(org.Dr.eg.db)
[1] "ACCNUM" "ALIAS" "ENSEMBL" "ENSEMBLPROT" "ENSEMBLTRANS" [6] "ENTREZID" "ENZYME" "EVIDENCE" "EVIDENCEALL" "GENENAME" [11] "GO" "GOALL" "IPI" "ONTOLOGY" "ONTOLOGYALL" [16] "PATH" "PFAM" "PMID" "PROSITE" "REFSEQ" [21] "SYMBOL" "UNIGENE" "UNIPROT" "ZFIN"
On Thu, Aug 13, 2020 at 2:13 PM Margolin, Gennady (NIH/NICHD) [C] via Bioc-devel <bioc-devel at r-project.org<mailto:bioc-devel at r-project.org>> wrote:
Hello, I have a short question ? how do I figure the genome version for org.Dr.eg.db package? I couldn?t see it in the DESCRIPTION and also it?s not in org.Dr.eg_dbInfo() output. It would be nice to know if this is danRer11/GRCz11 or some other assembly, as there are coordinates present in the DB. Thank you, Gennady _______________________________________________ Bioc-devel at r-project.org<mailto:Bioc-devel at r-project.org> mailing list https://stat.ethz.ch/mailman/listinfo/bioc-devel The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail.
Hi Gennady, That information should probably be cleaned up, and the BiMaps that point to the location data removed. While the OrgDbs do contain position information, it's been deprecated, which you would find if you tried to query using select():
select(org.Dr.eg.db, "30037", "CHR")
'select()' returned 1:1 mapping between keys and columns ENTREZID CHR 1 30037 5 Warning message: In .deprecatedColsMessage() : Accessing gene location information via 'CHR','CHRLOC','CHRLOCEND' is deprecated. Please use a range based accessor like genes(), or select() with columns values like TXCHROM and TXSTART on a TxDb or OrganismDb object instead. The rationale being that the OrgDb packages are intended to contain functional annotations, which are not based on any build, and instead are current as of the construction of the OrgDb package. Since positional information should be based on a genome release, those data have been migrated to the TxDb and EnsDb packages, which are based on a given release. Put a different way, the data in an OrgDb package is downloaded from NCBI as of a particular date, and the positional data we get are whatever we got from NCBI on that date. This is obviously a problem for the positional data, because what we get isn't necessarily build-specific. We get the TxDb data from the UCSC Genome Browser, which is build specific, so we can tell end users exactly what build the data come from. Ideally these data would be defunct in the OrgDb packages, but it hasn't happened yet. Best, Jim On Thu, Aug 13, 2020 at 4:39 PM Margolin, Gennady (NIH/NICHD) [C] via
Bioc-devel <bioc-devel at r-project.org> wrote:
Hi Vincent,
Thank you for responding.
Here is from the R documentation help page from this package (I have
version 3.10.0 (I doubt anything changed with the latest one, which is
3.11.4)):
-------------------------------------------------
org.Dr.egCHRLOC {org.Dr.eg.db}
Entrez Gene IDs to Chromosomal Location
Description
org.Dr.egCHRLOC is an R object that maps entrez gene identifiers to the
starting position of the gene. The position of a gene is measured as the
number of base pairs.
The CHRLOCEND mapping is the same as the CHRLOC mapping except that it
specifies the ending base of a gene instead of the start.
??
-------------------------------------------------
This output also does not show any genome version:
org.Dr.eg_dbInfo()
name
value
1 DBSCHEMAVERSION
2.1
2 Db type
OrgDb
3 Supporting package
AnnotationDbi
4 DBSCHEMA
ZEBRAFISH_DB
5 ORGANISM
Danio rerio
6 SPECIES
Zebrafish
7 EGSOURCEDATE
2019-Jul10
8 EGSOURCENAME
Entrez Gene
9 EGSOURCEURL
ftp://ftp.ncbi.nlm.nih.gov/gene/DATA
10 CENTRALID
EG
11 TAXID
7955
12 GOSOURCENAME
Gene Ontology
13 GOSOURCEURL
ftp://ftp.geneontology.org/pub/go/godatabase/archive/latest-lite/
14 GOSOURCEDATE
2019-Jul10
15 GOEGSOURCEDATE
2019-Jul10
16 GOEGSOURCENAME
Entrez Gene
17 GOEGSOURCEURL
ftp://ftp.ncbi.nlm.nih.gov/gene/DATA
18 KEGGSOURCENAME
KEGG GENOME
19 KEGGSOURCEURL
ftp://ftp.genome.jp/pub/kegg/genomes
20 KEGGSOURCEDATE
2011-Mar15
21 GPSOURCENAME UCSC Genome Bioinformatics
(Danio rerio)
22 GPSOURCEURL
23 GPSOURCEDATE
2017-Nov1
24 ENSOURCEDATE
2019-Jun24
25 ENSOURCENAME
Ensembl
26 ENSOURCEURL
ftp://ftp.ensembl.org/pub/current_fasta
27 UPSOURCENAME
Uniprot
28 UPSOURCEURL
http://www.UniProt.org/
29 UPSOURCEDATE Mon Oct 21
14:32:30 2019
From: Vincent Carey <stvjc at channing.harvard.edu>
Date: Thursday, August 13, 2020 at 2:46 PM
To: "Margolin, Gennady (NIH/NICHD) [C]" <gennady.margolin at nih.gov>
Cc: "bioc-devel at r-project.org" <bioc-devel at r-project.org>
Subject: Re: [Bioc-devel] Question about org.Dr.eg.db package
This should probably be posed to the support site. What version of the
package are you using? Where
are you seeing coordinates? I would expect those to be obtained from the
TxDb package, or perhaps
from AnnotationHub.
columns(org.Dr.eg.db)
[1] "ACCNUM" "ALIAS" "ENSEMBL" "ENSEMBLPROT"
"ENSEMBLTRANS"
[6] "ENTREZID" "ENZYME" "EVIDENCE" "EVIDENCEALL" "GENENAME"
[11] "GO" "GOALL" "IPI" "ONTOLOGY"
"ONTOLOGYALL"
[16] "PATH" "PFAM" "PMID" "PROSITE" "REFSEQ"
[21] "SYMBOL" "UNIGENE" "UNIPROT" "ZFIN"
On Thu, Aug 13, 2020 at 2:13 PM Margolin, Gennady (NIH/NICHD) [C] via
Bioc-devel <bioc-devel at r-project.org<mailto:bioc-devel at r-project.org>>
wrote:
Hello,
I have a short question ? how do I figure the genome version for
org.Dr.eg.db package? I couldn?t see it in the DESCRIPTION and also it?s
not in org.Dr.eg_dbInfo() output. It would be nice to know if this is
danRer11/GRCz11 or some other assembly, as there are coordinates present in
the DB.
Thank you,
Gennady
[[alternative HTML version deleted]]
_______________________________________________ Bioc-devel at r-project.org<mailto:Bioc-devel at r-project.org> mailing list https://stat.ethz.ch/mailman/listinfo/bioc-devel The information in this e-mail is intended only for th...{{dropped:31}}
Hi Jim, Hi Jim, Awesome, that makes sense now. I was wondering whether org.Dr.eg.db has only functional annotation, which I thought it was as it did not refer to a specific genome, unlike TxDb packages, but then I found what I said in my previous emails. Thank you very much, Gennady From: "James W. MacDonald" <jmacdon at uw.edu> Reply-To: "jmacdon at u.washington.edu" <jmacdon at u.washington.edu> Date: Thursday, August 13, 2020 at 5:41 PM To: "Margolin, Gennady (NIH/NICHD) [C]" <gennady.margolin at nih.gov> Cc: Vincent Carey <stvjc at channing.harvard.edu>, "bioc-devel at r-project.org" <bioc-devel at r-project.org> Subject: Re: [Bioc-devel] Question about org.Dr.eg.db package Hi Gennady, That information should probably be cleaned up, and the BiMaps that point to the location data removed. While the OrgDbs do contain position information, it's been deprecated, which you would find if you tried to query using select():
select(org.Dr.eg.db, "30037", "CHR")
'select()' returned 1:1 mapping between keys and columns ENTREZID CHR 1 30037 5 Warning message: In .deprecatedColsMessage() : Accessing gene location information via 'CHR','CHRLOC','CHRLOCEND' is deprecated. Please use a range based accessor like genes(), or select() with columns values like TXCHROM and TXSTART on a TxDb or OrganismDb object instead. The rationale being that the OrgDb packages are intended to contain functional annotations, which are not based on any build, and instead are current as of the construction of the OrgDb package. Since positional information should be based on a genome release, those data have been migrated to the TxDb and EnsDb packages, which are based on a given release. Put a different way, the data in an OrgDb package is downloaded from NCBI as of a particular date, and the positional data we get are whatever we got from NCBI on that date. This is obviously a problem for the positional data, because what we get isn't necessarily build-specific. We get the TxDb data from the UCSC Genome Browser, which is build specific, so we can tell end users exactly what build the data come from. Ideally these data would be defunct in the OrgDb packages, but it hasn't happened yet. Best, Jim
On Thu, Aug 13, 2020 at 4:39 PM Margolin, Gennady (NIH/NICHD) [C] via Bioc-devel <bioc-devel at r-project.org<mailto:bioc-devel at r-project.org>> wrote:
Hi Vincent,
Thank you for responding.
Here is from the R documentation help page from this package (I have version 3.10.0 (I doubt anything changed with the latest one, which is 3.11.4)):
-------------------------------------------------
org.Dr.egCHRLOC {org.Dr.eg.db}
Entrez Gene IDs to Chromosomal Location
Description
org.Dr.egCHRLOC is an R object that maps entrez gene identifiers to the starting position of the gene. The position of a gene is measured as the number of base pairs.
The CHRLOCEND mapping is the same as the CHRLOC mapping except that it specifies the ending base of a gene instead of the start.
??
-------------------------------------------------
This output also does not show any genome version:
org.Dr.eg_dbInfo()
name value 1 DBSCHEMAVERSION 2.1 2 Db type OrgDb 3 Supporting package AnnotationDbi 4 DBSCHEMA ZEBRAFISH_DB 5 ORGANISM Danio rerio 6 SPECIES Zebrafish 7 EGSOURCEDATE 2019-Jul10 8 EGSOURCENAME Entrez Gene 9 EGSOURCEURL ftp://ftp.ncbi.nlm.nih.gov/gene/DATA 10 CENTRALID EG 11 TAXID 7955 12 GOSOURCENAME Gene Ontology 13 GOSOURCEURL ftp://ftp.geneontology.org/pub/go/godatabase/archive/latest-lite/ 14 GOSOURCEDATE 2019-Jul10 15 GOEGSOURCEDATE 2019-Jul10 16 GOEGSOURCENAME Entrez Gene 17 GOEGSOURCEURL ftp://ftp.ncbi.nlm.nih.gov/gene/DATA 18 KEGGSOURCENAME KEGG GENOME 19 KEGGSOURCEURL ftp://ftp.genome.jp/pub/kegg/genomes 20 KEGGSOURCEDATE 2011-Mar15 21 GPSOURCENAME UCSC Genome Bioinformatics (Danio rerio) 22 GPSOURCEURL 23 GPSOURCEDATE 2017-Nov1 24 ENSOURCEDATE 2019-Jun24 25 ENSOURCENAME Ensembl 26 ENSOURCEURL ftp://ftp.ensembl.org/pub/current_fasta 27 UPSOURCENAME Uniprot 28 UPSOURCEURL http://www.UniProt.org/ 29 UPSOURCEDATE Mon Oct 21 14:32:30 2019 From: Vincent Carey <stvjc at channing.harvard.edu<mailto:stvjc at channing.harvard.edu>> Date: Thursday, August 13, 2020 at 2:46 PM To: "Margolin, Gennady (NIH/NICHD) [C]" <gennady.margolin at nih.gov<mailto:gennady.margolin at nih.gov>> Cc: "bioc-devel at r-project.org<mailto:bioc-devel at r-project.org>" <bioc-devel at r-project.org<mailto:bioc-devel at r-project.org>> Subject: Re: [Bioc-devel] Question about org.Dr.eg.db package This should probably be posed to the support site. What version of the package are you using? Where are you seeing coordinates? I would expect those to be obtained from the TxDb package, or perhaps from AnnotationHub.
columns(org.Dr.eg.db)
[1] "ACCNUM" "ALIAS" "ENSEMBL" "ENSEMBLPROT" "ENSEMBLTRANS" [6] "ENTREZID" "ENZYME" "EVIDENCE" "EVIDENCEALL" "GENENAME" [11] "GO" "GOALL" "IPI" "ONTOLOGY" "ONTOLOGYALL" [16] "PATH" "PFAM" "PMID" "PROSITE" "REFSEQ" [21] "SYMBOL" "UNIGENE" "UNIPROT" "ZFIN"
On Thu, Aug 13, 2020 at 2:13 PM Margolin, Gennady (NIH/NICHD) [C] via Bioc-devel <bioc-devel at r-project.org<mailto:bioc-devel at r-project.org><mailto:bioc-devel at r-project.org<mailto:bioc-devel at r-project.org>>> wrote:
Hello, I have a short question ? how do I figure the genome version for org.Dr.eg.db package? I couldn?t see it in the DESCRIPTION and also it?s not in org.Dr.eg_dbInfo() output. It would be nice to know if this is danRer11/GRCz11 or some other assembly, as there are coordinates present in the DB. Thank you, Gennady _______________________________________________ Bioc-devel at r-project.org<mailto:Bioc-devel at r-project.org><mailto:Bioc-devel at r-project.org<mailto:Bioc-devel at r-project.org>> mailing list https://stat.ethz.ch/mailman/listinfo/bioc-devel The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail. _______________________________________________ Bioc-devel at r-project.org<mailto:Bioc-devel at r-project.org> mailing list https://stat.ethz.ch/mailman/listinfo/bioc-devel -- James W. MacDonald, M.S. Biostatistician University of Washington Environmental and Occupational Health Sciences 4225 Roosevelt Way NE, # 100 Seattle WA 98105-6099
Glad to help! On Thu, Aug 13, 2020 at 5:51 PM Margolin, Gennady (NIH/NICHD) [C] <
gennady.margolin at nih.gov> wrote:
Hi Jim, Hi Jim, Awesome, that makes sense now. I was wondering whether org.Dr.eg.db has only functional annotation, which I thought it was as it did not refer to a specific genome, unlike TxDb packages, but then I found what I said in my previous emails. Thank you very much, Gennady *From: *"James W. MacDonald" <jmacdon at uw.edu> *Reply-To: *"jmacdon at u.washington.edu" <jmacdon at u.washington.edu> *Date: *Thursday, August 13, 2020 at 5:41 PM *To: *"Margolin, Gennady (NIH/NICHD) [C]" <gennady.margolin at nih.gov> *Cc: *Vincent Carey <stvjc at channing.harvard.edu>, " bioc-devel at r-project.org" <bioc-devel at r-project.org> *Subject: *Re: [Bioc-devel] Question about org.Dr.eg.db package Hi Gennady, That information should probably be cleaned up, and the BiMaps that point to the location data removed. While the OrgDbs do contain position information, it's been deprecated, which you would find if you tried to query using select():
select(org.Dr.eg.db, "30037", "CHR")
'select()' returned 1:1 mapping between keys and columns
ENTREZID CHR
1 30037 5
Warning message:
In .deprecatedColsMessage() :
Accessing gene location information via 'CHR','CHRLOC','CHRLOCEND' is
deprecated. Please use a range based accessor like genes(), or select()
with columns values like TXCHROM and TXSTART on a TxDb or OrganismDb
object instead.
The rationale being that the OrgDb packages are intended to contain
functional annotations, which are not based on any build, and instead are
current as of the construction of the OrgDb package. Since positional
information should be based on a genome release, those data have been
migrated to the TxDb and EnsDb packages, which are based on a given release.
Put a different way, the data in an OrgDb package is downloaded from NCBI
as of a particular date, and the positional data we get are whatever we got
from NCBI on that date. This is obviously a problem for the positional
data, because what we get isn't necessarily build-specific. We get the TxDb
data from the UCSC Genome Browser, which is build specific, so we can tell
end users exactly what build the data come from. Ideally these data would
be defunct in the OrgDb packages, but it hasn't happened yet.
Best,
Jim
On Thu, Aug 13, 2020 at 4:39 PM Margolin, Gennady (NIH/NICHD) [C] via
Bioc-devel <bioc-devel at r-project.org> wrote:
Hi Vincent,
Thank you for responding.
Here is from the R documentation help page from this package (I have
version 3.10.0 (I doubt anything changed with the latest one, which is
3.11.4)):
-------------------------------------------------
org.Dr.egCHRLOC {org.Dr.eg.db}
Entrez Gene IDs to Chromosomal Location
Description
org.Dr.egCHRLOC is an R object that maps entrez gene identifiers to the
starting position of the gene. The position of a gene is measured as the
number of base pairs.
The CHRLOCEND mapping is the same as the CHRLOC mapping except that it
specifies the ending base of a gene instead of the start.
??
-------------------------------------------------
This output also does not show any genome version:
org.Dr.eg_dbInfo()
name
value
1 DBSCHEMAVERSION
2.1
2 Db type
OrgDb
3 Supporting package
AnnotationDbi
4 DBSCHEMA
ZEBRAFISH_DB
5 ORGANISM
Danio rerio
6 SPECIES
Zebrafish
7 EGSOURCEDATE
2019-Jul10
8 EGSOURCENAME
Entrez Gene
9 EGSOURCEURL
ftp://ftp.ncbi.nlm.nih.gov/gene/DATA
10 CENTRALID
EG
11 TAXID
7955
12 GOSOURCENAME
Gene Ontology
13 GOSOURCEURL
ftp://ftp.geneontology.org/pub/go/godatabase/archive/latest-lite/
14 GOSOURCEDATE
2019-Jul10
15 GOEGSOURCEDATE
2019-Jul10
16 GOEGSOURCENAME
Entrez Gene
17 GOEGSOURCEURL
ftp://ftp.ncbi.nlm.nih.gov/gene/DATA
18 KEGGSOURCENAME
KEGG GENOME
19 KEGGSOURCEURL
ftp://ftp.genome.jp/pub/kegg/genomes
20 KEGGSOURCEDATE
2011-Mar15
21 GPSOURCENAME UCSC Genome Bioinformatics
(Danio rerio)
22 GPSOURCEURL
23 GPSOURCEDATE
2017-Nov1
24 ENSOURCEDATE
2019-Jun24
25 ENSOURCENAME
Ensembl
26 ENSOURCEURL
ftp://ftp.ensembl.org/pub/current_fasta
27 UPSOURCENAME
Uniprot
28 UPSOURCEURL
http://www.UniProt.org/
29 UPSOURCEDATE Mon Oct 21
14:32:30 2019
From: Vincent Carey <stvjc at channing.harvard.edu>
Date: Thursday, August 13, 2020 at 2:46 PM
To: "Margolin, Gennady (NIH/NICHD) [C]" <gennady.margolin at nih.gov>
Cc: "bioc-devel at r-project.org" <bioc-devel at r-project.org>
Subject: Re: [Bioc-devel] Question about org.Dr.eg.db package
This should probably be posed to the support site. What version of the
package are you using? Where
are you seeing coordinates? I would expect those to be obtained from the
TxDb package, or perhaps
from AnnotationHub.
columns(org.Dr.eg.db)
[1] "ACCNUM" "ALIAS" "ENSEMBL" "ENSEMBLPROT"
"ENSEMBLTRANS"
[6] "ENTREZID" "ENZYME" "EVIDENCE" "EVIDENCEALL" "GENENAME"
[11] "GO" "GOALL" "IPI" "ONTOLOGY"
"ONTOLOGYALL"
[16] "PATH" "PFAM" "PMID" "PROSITE" "REFSEQ"
[21] "SYMBOL" "UNIGENE" "UNIPROT" "ZFIN"
On Thu, Aug 13, 2020 at 2:13 PM Margolin, Gennady (NIH/NICHD) [C] via
Bioc-devel <bioc-devel at r-project.org<mailto:bioc-devel at r-project.org>>
wrote:
Hello,
I have a short question ? how do I figure the genome version for
org.Dr.eg.db package? I couldn?t see it in the DESCRIPTION and also it?s
not in org.Dr.eg_dbInfo() output. It would be nice to know if this is
danRer11/GRCz11 or some other assembly, as there are coordinates present in
the DB.
Thank you,
Gennady
[[alternative HTML version deleted]]
_______________________________________________ Bioc-devel at r-project.org<mailto:Bioc-devel at r-project.org> mailing list https://stat.ethz.ch/mailman/listinfo/bioc-devel The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail. [[alternative HTML version deleted]] _______________________________________________ Bioc-devel at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/bioc-devel -- James W. MacDonald, M.S. Biostatistician University of Washington Environmental and Occupational Health Sciences 4225 Roosevelt Way NE, # 100 Seattle WA 98105-6099
James W. MacDonald, M.S. Biostatistician University of Washington Environmental and Occupational Health Sciences 4225 Roosevelt Way NE, # 100 Seattle WA 98105-6099 [[alternative HTML version deleted]]