[PATCH] ./configure fails to recognize alphapca56 (PR#572) - R-devel

Fri, Jun 16, 2000 5:02 AM #

I am filing this as a bug report so it doesn't get lost.
Martyn

-----FW: <XFMail.000616094624.plummer@iarc.fr>-----

Date: Fri, 16 Jun 2000 09:46:24 +0200 (CEST)
Sender: owner-r-devel@stat.math.ethz.ch
From: Martyn Plummer <plummer@iarc.fr>
To: Naoki Takebayashi <ntakebay@bio.indiana.edu>
Subject: RE: [Rd] [PATCH] ./configure fails to recognize alphapca56 (R-1.
Cc: r-devel@stat.math.ethz.ch

On 15-Jun-00 Naoki Takebayashi wrote:

The config.sub file is part of the GNU automake package and is meant to be
used as is.  The version on my system (automake-1.4) does have an entry for
alphapca5[67], so I guess the config.sub that comes with R just needs to
be replaced with an up-to-date version.

Martyn
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
r-devel mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html
Send "info", "help", or "[un]subscribe"
(in the "body", not the subject !)  To: r-devel-request@stat.math.ethz.ch
_._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._

--------------End of forwarded message-------------------------

-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
r-devel mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html
Send "info", "help", or "[un]subscribe"
(in the "body", not the subject !)  To: r-devel-request@stat.math.ethz.ch
_._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._

Kurt Hornik

Sun, Jun 18, 2000 5:04 AM #

Thanks.

-----FW: <XFMail.000616094624.plummer@iarc.fr>-----

Date: Fri, 16 Jun 2000 09:46:24 +0200 (CEST)
Sender: owner-r-devel@stat.math.ethz.ch
From: Martyn Plummer <plummer@iarc.fr>
To: Naoki Takebayashi <ntakebay@bio.indiana.edu>
Subject: RE: [Rd] [PATCH] ./configure fails to recognize alphapca56 (R-1.
Cc: r-devel@stat.math.ethz.ch

On 15-Jun-00 Naoki Takebayashi wrote:

I think I reported this bug in the past.  At that time, I was told that
it is a bug of autoconf.

./configure does not recognize Linux on DEC Alpha 21164PC (a cheap version
of Alpha EV56), so all the compilation flags were set incorrectly.  I
don't know the right way to fix it (I don't know how autoconf works
yet ...), but the following patch fixes the problem.

Thank you,
Naoki

Naoki Takebayashi     <ntakebay@bio.indiana.edu>
--- Dept. of Biology, Indiana University, Jordan Hall 142
--- 1001 E. Third St. Bloomington, IN 47405-3700 USA


--- R-1.1.0/tools/config.sub.orig     Thu Jun 15 13:49:01 2000
+++ R-1.1.0/tools/config.sub  Thu Jun 15 14:00:25 2000
@@ -153,6 +153,7 @@
| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
| 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \
| alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
+             | alphapca56 \
| i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
| mips64 | mipsel | mips64el | mips64orion | mips64orionel \
| mipstx39 | mipstx39el \
@@ -177,6 +178,7 @@
| power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
| xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \
| alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
+           | alphapca56-* \
| ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
| sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
| sparc64-* | mips64-* | mipsel-* \

The config.sub file is part of the GNU automake package and is meant
to be used as is.  The version on my system (automake-1.4) does have
an entry for alphapca5[67], so I guess the config.sub that comes with
R just needs to be replaced with an up-to-date version.

Interesting.  You're on a Debian system like myself?  The automake 1.4
sources do not have that, but the versions in /usr/share/... do, same
for libtool.

Anyway, I just realized that autoconf is available by anonCVS, and that
the most current versions of the config.guess and config.sub scripts are
always in the CVS tree.  Will update the versions in the sources.

[Peter: this is something else we should most likely always do before a
new release, similar to changing the version numbers in the FAQ etc.  Do
we have a list of these front-matter things?]

-k

-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
r-devel mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html
Send "info", "help", or "[un]subscribe"
(in the "body", not the subject !)  To: r-devel-request@stat.math.ethz.ch
_._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._

Martyn Plummer

Mon, Jun 19, 2000 2:18 AM #

On 18-Jun-00 Kurt Hornik wrote:

This is much more complicated than I thought.  I'm using Red Hat, but I
see that the same thing: the version of config.sub in the source for 
automake is not the one that gets installed into /usr/share/automake.
During the build process, rpm runs "libtoolize --copy --force" which copies
the version of config.sub from /usr/share/libtool into the source directory.
The source for libtool-1.3.4 does have the up-to-date version of config.sub,
so I suppose this should be regarded as the original.

M.
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
r-devel mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html
Send "info", "help", or "[un]subscribe"
(in the "body", not the subject !)  To: r-devel-request@stat.math.ethz.ch
_._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._