I am using windows 7 , R version 3.3.1 whenever I am trying use library(dplyr) i am getting the follwing error: Error in get(Info[i, 1], envir = env) : cannot allocate memory block of size 2.5 Gb Error: package or namespace load failed for ?dplyr? pl help Regards Partha
library Dplyr
7 messages · Jeff Newmiller, Partha Sinha
This is not normal. I suggest making use of the maintainer() and sessionInfo() functions.
Sent from my phone. Please excuse my brevity. On August 24, 2016 7:47:25 AM PDT, Partha Sinha <pnsinha68 at gmail.com> wrote: >I am using windows 7 , R version 3.3.1 >whenever I am trying use >library(dplyr) >i am getting the follwing error: > >Error in get(Info[i, 1], envir = env) : > cannot allocate memory block of size 2.5 Gb >Error: package or namespace load failed for ?dplyr? > > >pl help > >Regards >Partha > > [[alternative HTML version deleted]] > >______________________________________________ >R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >https://stat.ethz.ch/mailman/listinfo/r-help >PLEASE do read the posting guide >http://www.R-project.org/posting-guide.html >and provide commented, minimal, self-contained, reproducible code.
i have used sessioninfo() the output I have got R version 3.3.1 (2016-06-21) Platform: i386-w64-mingw32/i386 (32-bit) Running under: Windows 7 (build 7600) locale: [1] LC_COLLATE=English_United Kingdom.1252 LC_CTYPE=English_United Kingdom.1252 [3] LC_MONETARY=English_United Kingdom.1252 LC_NUMERIC=C [5] LC_TIME=English_United Kingdom.1252 attached base packages: [1] stats graphics grDevices utils datasets methods base I tried to load ggplot2 and dplyr. both giving me similar problems Parth
On 24 August 2016 at 20:40, Jeff Newmiller <jdnewmil at dcn.davis.ca.us> wrote:
This is not normal. I suggest making use of the maintainer() and sessionInfo() functions. -- Sent from my phone. Please excuse my brevity. On August 24, 2016 7:47:25 AM PDT, Partha Sinha <pnsinha68 at gmail.com> wrote:
I am using windows 7 , R version 3.3.1
whenever I am trying use
library(dplyr)
i am getting the follwing error:
Error in get(Info[i, 1], envir = env) :
cannot allocate memory block of size 2.5 Gb
Error: package or namespace load failed for ?dplyr?
pl help
Regards
Partha
[[alternative HTML version deleted]]
______________________________________________ R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
And the only input you give to trigger this is library(dplyr) ?
Sent from my phone. Please excuse my brevity. On August 24, 2016 8:01:41 PM PDT, Partha Sinha <pnsinha68 at gmail.com> wrote: >i have used sessioninfo() >the output I have got >R version 3.3.1 (2016-06-21) >Platform: i386-w64-mingw32/i386 (32-bit) >Running under: Windows 7 (build 7600) > >locale: >[1] LC_COLLATE=English_United Kingdom.1252 LC_CTYPE=English_United >Kingdom.1252 >[3] LC_MONETARY=English_United Kingdom.1252 LC_NUMERIC=C > >[5] LC_TIME=English_United Kingdom.1252 > >attached base packages: >[1] stats graphics grDevices utils datasets methods base > > >I tried to load ggplot2 and dplyr. >both giving me similar problems > >Parth > >On 24 August 2016 at 20:40, Jeff Newmiller <jdnewmil at dcn.davis.ca.us> >wrote: > >> This is not normal. I suggest making use of the maintainer() and >> sessionInfo() functions. >> -- >> Sent from my phone. Please excuse my brevity. >> >> On August 24, 2016 7:47:25 AM PDT, Partha Sinha <pnsinha68 at gmail.com> >> wrote: >> >I am using windows 7 , R version 3.3.1 >> >whenever I am trying use >> >library(dplyr) >> >i am getting the follwing error: >> > >> >Error in get(Info[i, 1], envir = env) : >> > cannot allocate memory block of size 2.5 Gb >> >Error: package or namespace load failed for ?dplyr? >> > >> > >> >pl help >> > >> >Regards >> >Partha >> > >> > [[alternative HTML version deleted]] >> > >> >______________________________________________ >> >R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >> >https://stat.ethz.ch/mailman/listinfo/r-help >> >PLEASE do read the posting guide >> >http://www.R-project.org/posting-guide.html >> >and provide commented, minimal, self-contained, reproducible code. >> >> > > [[alternative HTML version deleted]] > >______________________________________________ >R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >https://stat.ethz.ch/mailman/listinfo/r-help >PLEASE do read the posting guide >http://www.R-project.org/posting-guide.html >and provide commented, minimal, self-contained, reproducible code.
yes. I start a fresh session and start to load the library
On 25 August 2016 at 09:34, Jeff Newmiller <jdnewmil at dcn.davis.ca.us> wrote:
And the only input you give to trigger this is library(dplyr) ? -- Sent from my phone. Please excuse my brevity. On August 24, 2016 8:01:41 PM PDT, Partha Sinha <pnsinha68 at gmail.com> wrote:
i have used sessioninfo() the output I have got R version 3.3.1 (2016-06-21) Platform: i386-w64-mingw32/i386 (32-bit) Running under: Windows 7 (build 7600) locale: [1] LC_COLLATE=English_United Kingdom.1252 LC_CTYPE=English_United Kingdom.1252 [3] LC_MONETARY=English_United Kingdom.1252 LC_NUMERIC=C [5] LC_TIME=English_United Kingdom.1252 attached base packages: [1] stats graphics grDevices utils datasets methods base I tried to load ggplot2 and dplyr. both giving me similar problems Parth On 24 August 2016 at 20:40, Jeff Newmiller <jdnewmil at dcn.davis.ca.us> wrote:
This is not normal. I suggest making use of the maintainer() and sessionInfo() functions. -- Sent from my phone. Please excuse my brevity. On August 24, 2016 7:47:25 AM PDT, Partha Sinha <pnsinha68 at gmail.com> wrote:
I am using windows 7 , R version 3.3.1
whenever I am trying use
library(dplyr)
i am getting the follwing error:
Error in get(Info[i, 1], envir = env) :
cannot allocate memory block of size 2.5 Gb
Error: package or namespace load failed for ?dplyr?
pl help
Regards
Partha
[[alternative HTML version deleted]]
______________________________________________ R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
[[alternative HTML version deleted]]
______________________________________________ R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
I can not reproduce that using a fresh install of R 3.3.1 Win32 and dplyr 0.5.0. I suggest that you re-install dplyr or R or both... perhaps from a different mirror than the one you originally used. Do not use "Run As Administrator" and say yes to creating a personal library. Install dplyr with install.packages( "dplyr" ). If you continue to have trouble and want help then you are going to have to make an effort to convey a reproducible set of steps to arrive at your error. The Posting Guide has good advice on how to communicate on the R mailing lists.
Sent from my phone. Please excuse my brevity. On August 24, 2016 10:08:09 PM PDT, Partha Sinha <pnsinha68 at gmail.com> wrote: >yes. I start a fresh session and start to load the library > > >On 25 August 2016 at 09:34, Jeff Newmiller <jdnewmil at dcn.davis.ca.us> >wrote: > >> And the only input you give to trigger this is >> >> library(dplyr) >> >> ? >> -- >> Sent from my phone. Please excuse my brevity. >> >> On August 24, 2016 8:01:41 PM PDT, Partha Sinha <pnsinha68 at gmail.com> >> wrote: >> >i have used sessioninfo() >> >the output I have got >> >R version 3.3.1 (2016-06-21) >> >Platform: i386-w64-mingw32/i386 (32-bit) >> >Running under: Windows 7 (build 7600) >> > >> >locale: >> >[1] LC_COLLATE=English_United Kingdom.1252 LC_CTYPE=English_United >> >Kingdom.1252 >> >[3] LC_MONETARY=English_United Kingdom.1252 LC_NUMERIC=C >> > >> >[5] LC_TIME=English_United Kingdom.1252 >> > >> >attached base packages: >> >[1] stats graphics grDevices utils datasets methods base >> > >> > >> >I tried to load ggplot2 and dplyr. >> >both giving me similar problems >> > >> >Parth >> > >> >On 24 August 2016 at 20:40, Jeff Newmiller ><jdnewmil at dcn.davis.ca.us> >> >wrote: >> > >> >> This is not normal. I suggest making use of the maintainer() and >> >> sessionInfo() functions. >> >> -- >> >> Sent from my phone. Please excuse my brevity. >> >> >> >> On August 24, 2016 7:47:25 AM PDT, Partha Sinha ><pnsinha68 at gmail.com> >> >> wrote: >> >> >I am using windows 7 , R version 3.3.1 >> >> >whenever I am trying use >> >> >library(dplyr) >> >> >i am getting the follwing error: >> >> > >> >> >Error in get(Info[i, 1], envir = env) : >> >> > cannot allocate memory block of size 2.5 Gb >> >> >Error: package or namespace load failed for ?dplyr? >> >> > >> >> > >> >> >pl help >> >> > >> >> >Regards >> >> >Partha >> >> > >> >> > [[alternative HTML version deleted]] >> >> > >> >> >______________________________________________ >> >> >R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >> >> >https://stat.ethz.ch/mailman/listinfo/r-help >> >> >PLEASE do read the posting guide >> >> >http://www.R-project.org/posting-guide.html >> >> >and provide commented, minimal, self-contained, reproducible >code. >> >> >> >> >> > >> > [[alternative HTML version deleted]] >> > >> >______________________________________________ >> >R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >> >https://stat.ethz.ch/mailman/listinfo/r-help >> >PLEASE do read the posting guide >> >http://www.R-project.org/posting-guide.html >> >and provide commented, minimal, self-contained, reproducible code. >> >> > > [[alternative HTML version deleted]] > >______________________________________________ >R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >https://stat.ethz.ch/mailman/listinfo/r-help >PLEASE do read the posting guide >http://www.R-project.org/posting-guide.html >and provide commented, minimal, self-contained, reproducible code.
doing what Jeff has told. Lets see what happens this time..
On 25 August 2016 at 11:54, Jeff Newmiller <jdnewmil at dcn.davis.ca.us> wrote:
I can not reproduce that using a fresh install of R 3.3.1 Win32 and dplyr 0.5.0. I suggest that you re-install dplyr or R or both... perhaps from a different mirror than the one you originally used. Do not use "Run As Administrator" and say yes to creating a personal library. Install dplyr with install.packages( "dplyr" ). If you continue to have trouble and want help then you are going to have to make an effort to convey a reproducible set of steps to arrive at your error. The Posting Guide has good advice on how to communicate on the R mailing lists. -- Sent from my phone. Please excuse my brevity. On August 24, 2016 10:08:09 PM PDT, Partha Sinha <pnsinha68 at gmail.com> wrote:
yes. I start a fresh session and start to load the library On 25 August 2016 at 09:34, Jeff Newmiller <jdnewmil at dcn.davis.ca.us> wrote:
And the only input you give to trigger this is library(dplyr) ? -- Sent from my phone. Please excuse my brevity. On August 24, 2016 8:01:41 PM PDT, Partha Sinha <pnsinha68 at gmail.com> wrote:
i have used sessioninfo() the output I have got R version 3.3.1 (2016-06-21) Platform: i386-w64-mingw32/i386 (32-bit) Running under: Windows 7 (build 7600) locale: [1] LC_COLLATE=English_United Kingdom.1252 LC_CTYPE=English_United Kingdom.1252 [3] LC_MONETARY=English_United Kingdom.1252 LC_NUMERIC=C [5] LC_TIME=English_United Kingdom.1252 attached base packages: [1] stats graphics grDevices utils datasets methods base I tried to load ggplot2 and dplyr. both giving me similar problems Parth On 24 August 2016 at 20:40, Jeff Newmiller
<jdnewmil at dcn.davis.ca.us>
wrote:
This is not normal. I suggest making use of the maintainer() and sessionInfo() functions. -- Sent from my phone. Please excuse my brevity. On August 24, 2016 7:47:25 AM PDT, Partha Sinha
<pnsinha68 at gmail.com>
wrote:
I am using windows 7 , R version 3.3.1
whenever I am trying use
library(dplyr)
i am getting the follwing error:
Error in get(Info[i, 1], envir = env) :
cannot allocate memory block of size 2.5 Gb
Error: package or namespace load failed for ?dplyr?
pl help
Regards
Partha
[[alternative HTML version deleted]]
______________________________________________ R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible
code.
[[alternative HTML version deleted]]
______________________________________________ R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
[[alternative HTML version deleted]]
______________________________________________ R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.