An embedded and charset-unspecified text was scrubbed... Name: not available URL: <https://stat.ethz.ch/pipermail/r-help/attachments/20090318/bd007eb4/attachment-0002.pl>
Help with Scviews
4 messages · Philippe GROSJEAN, Steve Sidney
Hello Sidney, If you look at http://www.sciviews.org/SciViews-K, you will notice that the old SciViews R Console application has now been superseded by the SciViews-K plugin in Komodo Edit. Also, the SciViews bundle has now been split into its packages components on CRAN. So, you can install all components (svMisc, svIDE, svGUI, ...), for instance by running install.packages("svMisc") but install.packages("SciViews") does not work anymore. To recall, the old SciViews R Console is not compatible with R > 2.2.1, and we are almost R 2.9.0. The new SciViews-K is compatible with current R version, and also, with Linux and Mac OS X in addition to Windows, the only OS supported by the old version. Please, update. Thanks, Philippe Grosjean ..............................................<?}))><........ ) ) ) ) ) ( ( ( ( ( Prof. Philippe Grosjean ) ) ) ) ) ( ( ( ( ( Numerical Ecology of Aquatic Systems ) ) ) ) ) Mons-Hainaut University, Belgium ( ( ( ( ( ..............................................................
Steve Sidney wrote:
Dear all I would appreciate it if someone could help me to install Scviews. 1) I am running Windows XP Service Pack 3 with 1Gb of memory and 120GB HDrive. 2) R is installed and runs fine RCommander is installed and seems to run reasonably well. Some issues where it 'bombs' out for no reason. 3) I cannot run (install.packages:"Scviews") from any CRAN site. 4) What I have done is downlaoded the Install file from the scviews.org site but when I run Scviews it says that it can't find the "Bundle" and then when I try and connect to CRAN (any site) it says it cannot find the package as per the comment above in 3) Any ideas, and has anyone got any experience with this package. Many thanks for any help, Regards Steve [[alternative HTML version deleted]]
______________________________________________ R-help at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Many thanks Phillipe I was a little confused with web site and must have missed the fact that Komodo Edit has replaced SciViews. I will try and follow the instructions on your email and if I run into any more problems I will communicate with you. Some additional questions. 1) Is it your intention to continue to develop Komodo - SciViews 2) What is the IDE package used for. 3) Does it still need Rcmdr to be installed to run/. Once again thanks for the help. Regards Steve ----- Original Message ----- From: "Philippe Grosjean" <phgrosjean at sciviews.org> To: "Steve Sidney" <sbsidney at mweb.co.za> Cc: <r-help at r-project.org> Sent: Thursday, March 19, 2009 11:19 AM Subject: Re: [R] Help with Scviews Hello Sidney, If you look at http://www.sciviews.org/SciViews-K, you will notice that the old SciViews R Console application has now been superseded by the SciViews-K plugin in Komodo Edit. Also, the SciViews bundle has now been split into its packages components on CRAN. So, you can install all components (svMisc, svIDE, svGUI, ...), for instance by running install.packages("svMisc") but install.packages("SciViews") does not work anymore. To recall, the old SciViews R Console is not compatible with R > 2.2.1, and we are almost R 2.9.0. The new SciViews-K is compatible with current R version, and also, with Linux and Mac OS X in addition to Windows, the only OS supported by the old version. Please, update. Thanks, Philippe Grosjean ..............................................<?}))><........ ) ) ) ) ) ( ( ( ( ( Prof. Philippe Grosjean ) ) ) ) ) ( ( ( ( ( Numerical Ecology of Aquatic Systems ) ) ) ) ) Mons-Hainaut University, Belgium ( ( ( ( ( ..............................................................
Steve Sidney wrote:
Dear all I would appreciate it if someone could help me to install Scviews. 1) I am running Windows XP Service Pack 3 with 1Gb of memory and 120GB HDrive. 2) R is installed and runs fine RCommander is installed and seems to run reasonably well. Some issues where it 'bombs' out for no reason. 3) I cannot run (install.packages:"Scviews") from any CRAN site. 4) What I have done is downlaoded the Install file from the scviews.org site but when I run Scviews it says that it can't find the "Bundle" and then when I try and connect to CRAN (any site) it says it cannot find the package as per the comment above in 3) Any ideas, and has anyone got any experience with this package. Many thanks for any help, Regards Steve [[alternative HTML version deleted]]
______________________________________________ R-help at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
-------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com 20:27:00
Steve Sidney wrote:
Many thanks Phillipe I was a little confused with web site and must have missed the fact that Komodo Edit has replaced SciViews. I will try and follow the instructions on your email and if I run into any more problems I will communicate with you. Some additional questions. 1) Is it your intention to continue to develop Komodo - SciViews
Yes.
2) What is the IDE package used for.
Was mainly for Tinn-R, but now, there is a separate TinnR package. It is kept here because we intend to use it for IDE-specific functions later on.
3) Does it still need Rcmdr to be installed to run/.
No. Best, PhG
Once again thanks for the help. Regards Steve ----- Original Message ----- From: "Philippe Grosjean" <phgrosjean at sciviews.org> To: "Steve Sidney" <sbsidney at mweb.co.za> Cc: <r-help at r-project.org> Sent: Thursday, March 19, 2009 11:19 AM Subject: Re: [R] Help with Scviews Hello Sidney, If you look at http://www.sciviews.org/SciViews-K, you will notice that the old SciViews R Console application has now been superseded by the SciViews-K plugin in Komodo Edit. Also, the SciViews bundle has now been split into its packages components on CRAN. So, you can install all components (svMisc, svIDE, svGUI, ...), for instance by running install.packages("svMisc") but install.packages("SciViews") does not work anymore. To recall, the old SciViews R Console is not compatible with R > 2.2.1, and we are almost R 2.9.0. The new SciViews-K is compatible with current R version, and also, with Linux and Mac OS X in addition to Windows, the only OS supported by the old version. Please, update. Thanks, Philippe Grosjean ..............................................<?}))><........ ) ) ) ) ) ( ( ( ( ( Prof. Philippe Grosjean ) ) ) ) ) ( ( ( ( ( Numerical Ecology of Aquatic Systems ) ) ) ) ) Mons-Hainaut University, Belgium ( ( ( ( ( .............................................................. Steve Sidney wrote:
Dear all I would appreciate it if someone could help me to install Scviews. 1) I am running Windows XP Service Pack 3 with 1Gb of memory and 120GB HDrive. 2) R is installed and runs fine RCommander is installed and seems to run reasonably well. Some issues where it 'bombs' out for no reason. 3) I cannot run (install.packages:"Scviews") from any CRAN site. 4) What I have done is downlaoded the Install file from the scviews.org site but when I run Scviews it says that it can't find the "Bundle" and then when I try and connect to CRAN (any site) it says it cannot find the package as per the comment above in 3) Any ideas, and has anyone got any experience with this package. Many thanks for any help, Regards Steve [[alternative HTML version deleted]]
______________________________________________ R-help at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
-------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com 20:27:00
______________________________________________ R-help at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.