John: Sorry, but I do not understand what you have done. It seems like you hard coded the format I want, correct? Bruce
John Kane wrote:
Hi Bruce,
We don't need all that code :) All that is required is the data.fame
being used in the xtable command and the actual xtable commands. Below
is what I think is a complete "minimal working example" for your
problem. Note that in the print.xtable command I have removed the file
path as it will be meaningless to other users. It gave me an error as
I don't even have a C: drive--I use linux.
I'd suggest posting it as a follow-up to your original question on
R-help and going from there. I have done a bit of Googling and it
looks, perhaps, possible to do what you want but it's beyond my
knowledge level at the moment. I "might" be able to figure it out but
in days whereas the real gurus on the R-help list may do it in 30 seconds.
Shifting to another topic, you are using "data" as the name of a
data.frame which is not a good idea as there is a function in R called
"data". It is possible to over-write functions in R with"
interesting" results. If you are feeling really adventurous try FALSE
<- TRUE and see what happens.
You also have 4 calls to plyr in the code and there is what I think is
a duplication of code below one of the library(plyr) calls, probably a
duplicate paste.. I'd suggest putting all library() or require()
calls at the top of the code.
And to be incredibly picky, you have a colnames () command at roughly
line 27:30 for a data.frame and names() is the usual (preferred?) way
to do this. colnames() is more used for a matrix. I "think" names() is
more more generic though you would have to ask someone who knows what
they are talking about it--not me-- to be sure.
Sorry I cannot be of more help.
##===========================================================
library(xtable)
dec_analy <- structure(list(DECILE = structure(c(10L, 1L, 2L, 3L, 4L, 5L,
6L, 7L, 8L, 9L, 11L), .Label = c("2", "3", "4", "5", "6", "7",
"8", "9", "bot", "top", "Total"), class = "factor"), `NUMBER OF
INDIVIDUALS` = c(5,
5, 5, 5, 5, 5, 5, 5, 5, 5, 50), `NUMBER OF RESPONDERS` = c(2,
1, 2, 0, 0, 0, 0, 1, 0, 1, 7), `RESPONSE RATE (%)` = c(0.4, 0.2,
0.4, 0, 0, 0, 0, 0.2, 0, 0.2, NA), `CUM RESPONSE RATE (%)` = c(0.4,
0.3, 0.333333333333333, 0.25, 0.2, 0.166666666666667, 0.142857142857143,
0.15, 0.133333333333333, 0.14, NA), Cum_Total_Response = c(NaN,
714.285714285714, 714.285714285714, 714.285714285714, 714.285714285714,
714.285714285714, 714.285714285714, 714.285714285714, 714.285714285714,
714.285714285714, NA)), .Names = c("DECILE", "NUMBER OF INDIVIDUALS",
"NUMBER OF RESPONDERS", "RESPONSE RATE (%)", "CUM RESPONSE RATE (%)",
"Cum_Total_Response"), row.names = c(NA, 11L), class = "data.frame")
DECILE_TABLE <-xtable(dec_analy, digits = c(0,0,0,0,2,2,0),
align = "ccccccc", latex.environments = "center",
caption = "Decile Analysis based on Y (RESPONSE)
regressed on X1 X2 X3")
DECILE_TABLE
print.xtable(DECILE_TABLE, type="html",
include.rownames = FALSE,
caption.placement = "top",
align = "p{.5in}p{.5in}p{.5in}p{.5in}p{.5in}p{.5in}")
#============================================================
On Tuesday, May 16, 2017 6:56 AM, BR_email <br at dmstat1.com> wrote:
John:
Did not mean to take a short-cut, but I thought the code was not needed.
Your follow-up is appreciated. Here's the code. I want the column headings
to wrap around into two lines, not one long heading.
Any help is greatly sought. Thanks. Bruce
~~
Response <- rbinom(50,1,0.2)
yhat <- runif(50)
data <- data.frame(Response,yhat)
data <- data[order(data$yhat,decreasing=TRUE),]
cum_R <- cumsum(data$Response)
sam_size <- nrow(data)
cum_n <- seq(1:1,sam_size)
wt <- rep(c(1), times=sam_size)
cum_wt <- cumsum(wt)
dec <- (cum_n/sam_size)
decc <- floor((cum_n*10)/(sam_size+1))
dec_mean <- aggregate(data$Response, by=list(decc), mean)
dd_ <- data.frame(cum_R, sam_size, cum_wt, cum_n, decc)
dd <- data.frame(Response, dd_)
dec_mean <- aggregate(data$Response ~ decc, dd, mean)
wt <- rep(c(1), times=sam_size)
cum_wt <- aggregate(wt ~ decc, dd, sum)
cum_R <- aggregate(data$Response ~ decc, dd, sum)
dec_mean_wt <- cbind(dec_mean, cum_wt)
dec_mean_wt <- dec_mean_wt[-3]
dec_mean_wt_R <- cbind(dec_mean_wt, cum_R)
dec_mean_wt_R <- dec_mean_wt_R[-4]
colnames(dec_mean_wt_R) <- c("Decile", "Avg_Response", "No_Individuals",
"Total_Response")
dec_mean_wt_R <- dec_mean_wt_R[,c(1,2,3,4)]
cum_n <- dec_mean_wt_R[3]
cum_n <- cumsum(cum_n)
library(plyr)
Cum_Inds <- rename(cum_n, c(No_Individuals="Cum_Inds"))
Cum_Response <- dec_mean_wt_R[4]
Cum_Response <- cumsum(Cum_Response)
library(plyr)
Cum_Total_Response <- rename(Cum_Response,
c(Total_Response="Cum_Total_Response"))
dec_mean_wt_R_nR <- cbind(dec_mean_wt_R, Cum_Inds, Cum_Total_Response)
Cum_Decile_Response <- Cum_Total_Response/ Cum_Inds
library(plyr)
Cum_Decile_Response <-rename(Cum_Decile_Response,
c(Cum_Total_Response="Cum_Decile_Response"))
dec_mean_wt_R_nRD <- cbind(dec_mean_wt_R_nR, Cum_Decile_Response)
avg_RR <- dec_mean_wt_R_nRD[10,7]
Cum_Lift <- (Cum_Decile_Response/avg_RR)*100
library(plyr)
Cum_Lift <-rename(Cum_Lift, c(Cum_Decile_Response="Cum_Lift"))
DECILE <- c("top","2","3","4","5","6","7","8","9","bot")
dec_mean_wt_R_nRDL <- cbind(dec_mean_wt_R_nRD, Cum_Lift,DECILE)
options(digits=3)
dec_mean_wt_R_nRDL <- dec_mean_wt_R_nRDL[,c(9,3,4,2,7,8)]
total_line<-cbind(DECILE="Total",
as.data.frame(matrix(c(colSums(dec_mean_wt_R_nRDL[ , 2:3]), rep(NA,
3)),nrow=1)))
names(total_line) <-names(dec_mean_wt_R_nRDL)
dec_mean_wt_R_nRDLT <-rbind(dec_mean_wt_R_nRDL,total_line)
decile_table <- dec_mean_wt_R_nRDLT
library(plyr)
dec_analy <- rename(decile_table,
c(No_Individuals="NUMBER OF INDIVIDUALS",
Total_Response="NUMBER OF RESPONDERS",
Avg_Response="RESPONSE RATE (%)",
Decile_RespRate="RESPONSE RATE (%)",
Cum_Decile_Response="CUM RESPONSE RATE (%)" ,
Cum_Lift="CUM LIFT"))
#Install the xtable package: install.packages("xtable")
#Load the xtable package:
library(xtable)
DECILE_TABLE <-xtable(dec_analy, digits = c(0,0,0,0,2,2,0),
align = "ccccccc", latex.environments = "center",
caption = "Decile Analysis based on Y (RESPONSE)
regressed on X1 X2 X3")
DECILE_TABLE
print.xtable(DECILE_TABLE, type="html",file="C:/R_Data/DecileTable.html",
include.rownames = FALSE,
caption.placement = "top",
align = "p{.5in}p{.5in}p{.5in}p{.5in}p{.5in}p{.5in}")
John Kane wrote:
Hi Bruce, I accidentally replied just to you and we should be replying to the list especially since there are a lot of people there who know a lot more about xtabs than I do. My bad. I use xtabs from time to time and love it but I occasionally feel that I am groping in the dark when I try anything fancy. What we need is an actual working example so we would need not only the table code but a sample of the data with some of the long titles included. I'd suggest resubmitting the table information with some sampled data to the list. Have a look at Reproducibility ? Advanced R. <http://adv-r.had.co.nz/Reproducibility.html> for some suggestions on how to put one together. In particular, some sample data in dput form ( see ?dput) would be best. Data in dput() format is essentially an exact copy of your data and avoids confusion in reading in data. that is a factor remains a factor, character data remains character and so on. Reproducibility ? Advanced R. <http://adv-r.had.co.nz/Reproducibility.html> On Monday, May 15, 2017 1:40 PM, BR_email <br at dmstat1.com
<mailto:br at dmstat1.com>> wrote:
John:
Here is the code of my xtable:
TABLE <-xtable(dec_analy, digits = c(0,0,0,0,2,2,0),
align = "ccccccc", latex.environments = "center",
caption = "Analysis ")
print.xtable(TABLE, type="html",file="C:/R_Data/Table.html",
include.rownames = FALSE,
caption.placement = "top",
align = "p{.5in}p{.5in}p{.5in}p{.5in}p{.5in}p{.5in}")
BR_email wrote:
John: After I generate the xtable table, I manually edited (by inserting <br/>) the html header, below. Is there a way in xtable that I can set some setting to affect my xtable table? Thanks for your reply. Bruce <table border=1> <caption align="top"> Analysis </caption> <tr> <th> DECILE </th> <th> NUMBER OF <br /> INDIVIDUALS <br /> </th> <th> NUMBER OF <br /> RESPONDERS <br /> </th> <th> RESPONSE <br /> RATE (%) <br /> </th> <th> CUM RESPONSE <br /> RATE (%) <br /> </th> <th> CUM LIFT </th> </tr> John Kane wrote:
Can you give us an example. I am having a problem visualizing this. It seems obvious just to put in a line break normally but in xtabs who knows? On Monday, May 15, 2017 1:15 PM, Bruce Ratner PhD <br at dmstat1.com
<mailto:br at dmstat1.com>
<mailto:br at dmstat1.com <mailto:br at dmstat1.com>>>
wrote: R-help: I'm using xtable that produces a table in html with one-line for each of the long column headings/names. I would like to word wrap the column headings to break into
two-lines.
Any suggestion as to which argument needs adjustment is appreciated. Bruce
______________________________________________ R-help at r-project.org <mailto:R-help at r-project.org>
<mailto:R-help at r-project.org <mailto:R-help at r-project.org>>
<mailto:R-help at r-project.org <mailto:R-help at r-project.org>
<mailto:R-help at r-project.org <mailto:R-help at r-project.org>>> mailing
list -- To
UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.