I have no idea neither. ;(
I might give up from now,,,,,,
Thanks again!
Best,
Jihee
From: "Fox, John" <jfox at mcmaster.ca>
Sent: Friday, January 18, 2019 12:02:42 AM
To:"???" <wjh1518 at ht.co.kr>
Cc:"<r-help at r-project.org>" <r-help at R-project.org></r-help at r-project.org>
Subject:Re: [R] importing data error question
Dear Jihee,
Your latest attempt has gotten farther than the previous one but has produced a different error. The command to read the data set was generated properly. You can see whether the data set was in fact read by typing prestige (the name you gave to the data set) at the > command prompt in the R console. Assuming that the data set was read, an error occurred when the Rcmdr tried to make it the active data set. I'm afraid that I don't understand how this could happen because this procedure works correctly for me and for others. The underlying code is invoked whenever the Rcmdr reads a dara set.
I suggest that you try two additional things:
(1) I noticed that you loaded the FactoMineR and SensoMineR plug-ins. Try again without loading these plug-ins.
(2) Download and try reading the plain-text data file from <https://socialsciences.mcmaster.ca/jfox/Courses/R/ICPSR/Prestige.xlsx>, using "Data > Import data > From text file, clipboard, or URL"; you can take all of the defaults in the resulting dialog box.
If neither of these works then I'm afraid that I'm out of ideas. There's something peculiar about your R installation that I can't detect.
Best,
John
On Jan 17, 2019, at 12:24 AM, ??? <wjh1518 at ht.co.kr> wrote:
Dear John,
I tried with your file. R commander could read the file but there's still no active dataset....
Anyway I'll send my file, too
Jihee
<528c421a382d426895f6446b32fbc6f0.png>
From: "Fox, John" <jfox at mcmaster.ca>
Sent: Thursday, January 17, 2019 2:09:52 PM
To:"???" <wjh1518 at ht.co.kr>
Cc:"<r-help at r-project.org>" <r-help at R-project.org></r-help at r-project.org>
Subject:Re: [R] importing data error question
Dear Jihee,
This appears to be a different problem. You were apparently able to access the spreadsheet file, but the R Commander didn't find a suitable worksheet in it.
Try downloading and reading the file at <https://socialsciences.mcmaster.ca/jfox/Courses/R/ICPSR/Prestige.xlsx>. If that works, send me privately (i.e., directly) your Excel spreadsheet file and I'll take a look at it.
Best,
John
On Jan 16, 2019, at 9:49 PM, ??? <wjh1518 at ht.co.kr> wrote:
Dear John,
now i can use english thank you very much!!
um.. but nothing's changed... with that {r} message at R Markdown.
There's no dataset.
i tried both .xls and .xlsx .
Jihee
<fbe6254214d94e74b98569b08bb3bf07.png>
From: "Fox, John" <jfox at mcmaster.ca>
Sent: Thursday, January 17, 2019 10:59:44 AM
To:"???" <wjh1518 at ht.co.kr>
Cc:"<r-help at r-project.org>" <r-help at R-project.org></r-help at r-project.org>
Subject:Re: [R] importing data error question
Dear Jihee,
Probably the easiest way to change the language to English temporarily in R is to enter the command
Sys.setenv(LANGUAGE="en")
at the R command prompt prior to loading the Rcmdr package.
I hope that this helps,
John
On Jan 16, 2019, at 7:02 PM, ??? <wjh1518 at ht.co.kr> wrote:
Thanks for your help!
I was having trouble with finding how to use english...
Even though I try to use english language, I couldn't change language of R commander. (it is still korean)
Sorry but.. do you know how to change language of "R commander"? I have no idea why it doesn't change.
Best,
Jihee
From: "Fox, John" <jfox at mcmaster.ca>
Sent: Thursday, January 17, 2019 1:59:03 AM
To:"???" <wjh1518 at ht.co.kr>
Cc:"r-help at r-project.org" <r-help at r-project.org>
Subject:Re: [R] importing data error question
Dear jihee,
I've looked into this problem further, using my Mac where it's easier to temporarily change languages and character sets than on Windows, and I discovered the following:
I was able to duplicate your problem with importing Excel files when working in Korean. There's a similar problem with the import SAS b7dat files but not with the other file-import dialogs.
I observed a similar problem when working in Chinese (LANG="zh") but not in simplified Chinese (zh_CN) or Japanese (ja), so the problem isn't simply with non-Latin character sets. There is no problem in English, Spanish (es), or French (fr), and I didn't check the other languages into which the Rcmdr is translated.
I think that the problem originates in the Korean and Chinese translation files and I'll contact the translators to see whether they can fix it.
Thank you for reporting this issue.
John
On Jan 14, 2019, at 11:36 PM, Fox, John <jfox at mcmaster.ca> wrote:
Dear jihee,
On Jan 14, 2019, at 9:00 PM, ??? <wjh1518 at ht.co.kr> wrote:
You said previously that you were using a Mac, so I'm surprised that you now say that you're using Windows. I don't have a Windows 7 system, but I can confirm that importing from Excel files works perfectly fine under Windows 10, as I just verified, and I'd be surprised if the Windows version matters.
--> no, I never said i was using a Mac.
Sorry, I guess I got that from the error message you originally reported, which was "Error in structure(.External(.C_dotTclObjv, objv), class = "tclObj") : [tcl] bad Macintosh file type "?*?"." I've never seen that error and it seems peculiar that it would occur on a Windows system.
You still haven't reported the versions of R, the Rcmdr package, and the other packages that you're using. The easiest way to do this is to show the output of the sessionInfo() command.
--> sessionInfo()
R version 3.5.2 (2018-12-20)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 7 x64 (build 7601) Service Pack 1
Matrix products: default
locale:
[1] LC_COLLATE=Korean_Korea.949 LC_CTYPE=Korean_Korea.949
[3] LC_MONETARY=Korean_Korea.949 LC_NUMERIC=C
[5] LC_TIME=Korean_Korea.949
attached base packages:
[1] tcltk splines stats graphics grDevices utils datasets methods
[9] base
other attached packages:
[1] RcmdrPlugin.SensoMineR_1.11-01 RcmdrPlugin.FactoMineR_1.6-0
[3] Rcmdr_2.5-1 effects_4.1-0
[5] RcmdrMisc_2.5-1 sandwich_2.5-0
[7] car_3.0-2 carData_3.0-2
[9] SensoMineR_1.23 FactoMineR_1.41
loaded via a namespace (and not attached):
[1] gtools_3.8.1 Formula_1.2-3 latticeExtra_0.6-28
[4] cellranger_1.1.0 pillar_1.3.1 backports_1.1.3
[7] lattice_0.20-38 digest_0.6.18 RColorBrewer_1.1-2
[10] checkmate_1.8.5 minqa_1.2.4 colorspace_1.3-2
[13] survey_3.35 htmltools_0.3.6 Matrix_1.2-15
[16] plyr_1.8.4 pkgconfig_2.0.2 haven_2.0.0
[19] scales_1.0.0 openxlsx_4.1.0 rio_0.5.16
[22] lme4_1.1-19 htmlTable_1.13.1 tibble_1.4.2
[25] relimp_1.0-5 ggplot2_3.1.0 nnet_7.3-12
[28] lazyeval_0.2.1 survival_2.43-3 magrittr_1.5
[31] crayon_1.3.4 readxl_1.2.0 nlme_3.1-137
[34] MASS_7.3-51.1 forcats_0.3.0 foreign_0.8-71
[37] class_7.3-14 tools_3.5.2 data.table_1.11.8
[40] hms_0.4.2 tcltk2_1.2-11 stringr_1.3.1
[43] munsell_0.5.0 cluster_2.0.7-1 zip_1.0.0
[46] flashClust_1.01-2 compiler_3.5.2 e1071_1.7-0
[49] rlang_0.3.1 grid_3.5.2 nloptr_1.2.1
[52] rstudioapi_0.9.0 htmlwidgets_1.3 leaps_3.0
[55] base64enc_0.1-3 gtable_0.2.0 abind_1.4-5
[58] curl_3.2 reshape2_1.4.3 AlgDesign_1.1-7.3
[61] gridExtra_2.3 zoo_1.8-4 knitr_1.21
[64] nortest_1.0-4 Hmisc_4.1-1 KernSmooth_2.23-15
[67] stringi_1.2.4 Rcpp_1.0.0 rpart_4.1-13
[70] acepack_1.4.1 scatterplot3d_0.3-41 xfun_0.4
This was the status that I tried to import Excel data.
These packages seem up-to-date.
Also, have you tried importing an Excel file in the Rcmdr *without* the two plug-in packages loaded, as I suggested in my original response?
--> I tried without plug-in packages, but It didn't work.
OK, so you tried the setup that works for me and, I assume from the lack of similar error reports, for others.
It occurs to me that the problem may be produced by using the Rcmdr under R with a non-Latin set, but if that were the case I would have expected the problem to have surfaced earlier. Did you try reading another kind of file, such as a plain-text data file?
--> I don't know what is plain-text data file.....
A plain-text data file could, e.g., be created from an Excel file by exporting a worksheet as a .csv (comma-separated-values) file; you could read this into the Rcmdr via Data > Import data > from text file, specifying the field separator as commas.
I'm curious to see what happens.
Best,
John
From: "Fox, John" <jfox at mcmaster.ca>
Sent: Monday, January 14, 2019 11:15:36 PM
To:"???" <wjh1518 at ht.co.kr>
Cc:"<r-help at r-project.org>" <r-help at R-project.org></r-help at r-project.org>
Subject:Re: [R] importing data error question
Dear jihee,
On Jan 13, 2019, at 9:28 PM, ??? <wjh1518 at ht.co.kr> wrote:
From: "???" <wjh1518 at ht.co.kr>
Sent: Monday, January 14, 2019 9:40:26 AM
To:"Fox, John" <jfox at mcmaster.ca>
Subject:Re: [R] importing data error question
Thanks for your replies.
I'm using windows 7, I loaded FactoMineR,
You said previously that you were using a Mac, so I'm surprised that you now say that you're using Windows. I don't have a Windows 7 system, but I can confirm that importing from Excel files works perfectly fine under Windows 10, as I just verified, and I'd be surprised if the Windows version matters.
SensoMineR and then Rcmdr. (Downloaded FacroMineR, SensoMineR, Rcmdr, Rcmdrplugin.FactomineR, Rcmdrplugin.SensomineR and other required packages that downloaded automatically)
This problem occurred when I select Data > Import data > From Excel file.
I checked FactoMineR and SensoMineR packages are loaded and using..
You still haven't reported the versions of R, the Rcmdr package, and the other packages that you're using. The easiest way to do this is to show the output of the sessionInfo() command.
Also, have you tried importing an Excel file in the Rcmdr *without* the two plug-in packages loaded, as I suggested in my original response?
It occurs to me that the problem may be produced by using the Rcmdr under R with a non-Latin set, but if that were the case I would have expected the problem to have surfaced earlier. Did you try reading another kind of file, such as a plain-text data file?
Best,
John
From: "Fox, John" <jfox at mcmaster.ca>
Sent: Friday, January 11, 2019 10:48:38 PM
To:"PIKAL Petr" <petr.pikal at precheza.cz>
Cc:"???" <wjh1518 at ht.co.kr>; "r-help at R-project.org" <r-help at r-project.org>
Subject:Re: [R] importing data error question
Dear Petr and jihee,
The Rcmdr can import Excel files, and as I just verified, it can do so on a Mac listing files of all types (*) in the open-file dialog box (which is the default).
So, as Petr suggests, more information is required to help you, including the versions of macOS, R, and all packages you have loaded. In particular, does the problem occur when you try to read the Excel file *without* FactoMineR and SensoMineR loaded? Also, when the does problem occur -- immediately when you select Data > Import data > From Excel file, or at some other point?
Best,
John
-------------------------------------------------
John Fox, Professor Emeritus
McMaster University
Hamilton, Ontario, Canada
Web: http::/socserv.mcmaster.ca/jfox
On Jan 11, 2019, at 5:07 AM, PIKAL Petr <petr.pikal at precheza.cz> wrote:
Hi
I do not use Rcmdr but from documentation it seems to me that it does not have much to do with importing data from Excel.
So without some additional info from your side (at least used commands) you hardly get any reasonable answer.
Cheers
Petr
-----Original Message-----
From: R-help <r-help-bounces at r-project.org> On Behalf Of ???
Sent: Friday, January 11, 2019 9:14 AM
To: r-help at R-project.org
Subject: [R] importing data error question
Hi I'm jihee and I have a question about error...
I'm using R 3.5.2 and tried to use Rcmdr package.
and using FactoMineR and SensoMineR to analyze sensory data through PCA
but i can't import excel data with Rcmdr.
it has this messege :
Error in structure(.External(.C_dotTclObjv, objv), class = "tclObj") :
[tcl] bad Macintosh file type "?*?"
what is wrong with my R??? T_T
Thanks for your help.
jihee.
[[alternative HTML version deleted]]