Skip to content

[R-pkg-devel] Pre-test failure

4 messages · Ben Bolker, Hong Ooi, Roy Mendelssohn - NOAA Federal

#
I test my packages very carefully before submission.  Earlier today I submitted a package that passed this morning on both winbuilder_release and winbuilder_devel.  The pre-test submission failed on rebuilding the vignette.  I just tried again on winbuilder_release and winbuilder_devel,  no problems.  There are no problems either on my Mac or a Fedora image. Moreover I tested the specific lines that were flagged,  and they work fine

So my questions are:

1.  Should I just resubmit assuming it was some kind of quirk?

2. Do I need to bump up the version to resubmit?

Thanks,

-Roy


**********************
"The contents of this message do not reflect any position of the U.S. Government or NOAA."
**********************
Roy Mendelssohn
Supervisory Operations Research Analyst
NOAA/NMFS
Environmental Research Division
Southwest Fisheries Science Center
***Note new street address***
110 McAllister Way
Santa Cruz, CA 95060
Phone: (831)-420-3666
Fax: (831) 420-3980
e-mail: Roy.Mendelssohn at noaa.gov www: https://www.pfeg.noaa.gov/

"Old age and treachery will overcome youth and skill."
"From those who have been given much, much will be expected" 
"the arc of the moral universe is long, but it bends toward justice" -MLK Jr.
#
Can you share the links to the CRAN pre-test logs? Someone here 
might be able to guess what went wrong ...

    (FWIW I always *think* I'm testing very carefully, and I almost 
always get something wrong ...)

On 10/23/20 11:18 AM, Roy Mendelssohn - NOAA Federal via R-package-devel 
wrote:
#
My personal opinion is that as long as a package doesn't actually make it on to CRAN, you don't need to bump the version. It's worked so far....

-----Original Message-----
From: R-package-devel <r-package-devel-bounces at r-project.org> On Behalf Of Ben Bolker
Sent: Saturday, 24 October 2020 2:23 AM
To: r-package-devel at r-project.org
Subject: [EXTERNAL] Re: [R-pkg-devel] Pre-test failure

    Can you share the links to the CRAN pre-test logs? Someone here 
might be able to guess what went wrong ...

    (FWIW I always *think* I'm testing very carefully, and I almost 
always get something wrong ...)

On 10/23/20 11:18 AM, Roy Mendelssohn - NOAA Federal via R-package-devel 
wrote:
______________________________________________
R-package-devel at r-project.org mailing list
https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fstat.ethz.ch%2Fmailman%2Flistinfo%2Fr-package-devel&amp;data=04%7C01%7Chongooi%40microsoft.com%7C05d6b3fb72074139cfd508d87767931b%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637390634032310385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=CXtC%2FqbZ0B3znnxcTHQb2voADGKPFIhl1jfTrzGl%2Ft0%3D&amp;reserved=0
#
https://win-builder.r-project.org/incoming_pretest/plotdap_0.0.8_20201023_155845/Windows/00check.log

my problem is I don't have Windows myself.  So I assume if I can pass both winbuilders I should be good.  Here is the link to winbuilder_release I just ran:

https://win-builder.r-project.org/exQtKk9TKIeP

As you can see,  that is ok and rebuilt the vignette just fine.  

Thanks,

-Roy
**********************
"The contents of this message do not reflect any position of the U.S. Government or NOAA."
**********************
Roy Mendelssohn
Supervisory Operations Research Analyst
NOAA/NMFS
Environmental Research Division
Southwest Fisheries Science Center
***Note new street address***
110 McAllister Way
Santa Cruz, CA 95060
Phone: (831)-420-3666
Fax: (831) 420-3980
e-mail: Roy.Mendelssohn at noaa.gov www: https://www.pfeg.noaa.gov/

"Old age and treachery will overcome youth and skill."
"From those who have been given much, much will be expected" 
"the arc of the moral universe is long, but it bends toward justice" -MLK Jr.