Notice the numbers running up the left hand side of the graph, covering the y-axis. - using Python rpy2. - create charts using Quantmod, example code below robjects.r['pdf'](file=filename) robjects.r['chartSeries'](dataf, subset=subset, theme="white", TA=TA) robjects.r['dev.off']() Any ideas? -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://stat.ethz.ch/pipermail/r-sig-finance/attachments/20110128/c6f37248/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: VZ_3mo.pdf Type: application/pdf Size: 29697 bytes Desc: not available URL: <https://stat.ethz.ch/pipermail/r-sig-finance/attachments/20110128/c6f37248/attachment.pdf>
What's Wrong with this Chart?
5 messages · Dan N., Jeff Ryan
Dan N. You'll need to provide something to make this reproducible. Typically that would be a very **small** example created with random data or dput your data. In addition you'd need to explain what TA is, since I think that might be the issue. Also some additional info like platform, additional things you tried (e.g. running in R - to remove the potential for Rpy to be a cause). You can also try using chart_Series, add_TA, add_BBands and add_Vo to see if that fixes your issue. That is the new version of chartSeries that isn't 'complete', but it is much nicer for most basic things. In general the 'is this broken?' is a non-starter for help, since it places the additional burden of recreating your environment on the helper. In this case, the helper is also the person who helped the first time by writing and providing the code that you are using. Of course all of this is in the posting guide(s). Best, Jeff
On Fri, Jan 28, 2011 at 1:23 PM, Dan N. <exshovelrydr at gmail.com> wrote:
Notice the numbers running up the left hand side of the graph, covering the y-axis. ?- using Python rpy2. ?- create charts using Quantmod, example code below robjects.r['pdf'](file=filename) robjects.r['chartSeries'](dataf, subset=subset, theme="white", TA=TA) robjects.r['dev.off']() Any ideas?
_______________________________________________ R-SIG-Finance at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-sig-finance -- Subscriber-posting only. If you want to post, subscribe first. -- Also note that this is not the r-help list where general R questions should go.
Jeffrey Ryan jeffrey.ryan at lemnica.com www.lemnica.com
An embedded and charset-unspecified text was scrubbed... Name: not available URL: <https://stat.ethz.ch/pipermail/r-sig-finance/attachments/20110128/5d12da42/attachment.pl>
On Fri, Jan 28, 2011 at 3:09 PM, Dan N. <exshovelrydr at gmail.com> wrote:
Dear Jeffery Ryan,
It's Jeffrey.
I was simply asking if anyone had ideas on why the chart looked this way. Have you seen this before or not? ?I was not asking for a lecture on mailing list protocol, how to recreate my environment, or any other such nonsense.
To answer your question --- yes, I have seen it before. HTH Jeff
On Fri, Jan 28, 2011 at 3:41 PM, Jeffrey Ryan <jeffrey.ryan at lemnica.com>wrote:
Dan N. You'll need to provide something to make this reproducible. Typically that would be a very **small** example created with random data or dput your data. ?In addition you'd need to explain what TA is, since I think that might be the issue. ?Also some additional info like platform, additional things you tried (e.g. running in R - to remove the potential for Rpy to be a cause). You can also try using chart_Series, add_TA, add_BBands and add_Vo to see if that fixes your issue. ?That is the new version of chartSeries that isn't 'complete', but it is much nicer for most basic things. In general the 'is this broken?' is a non-starter for help, since it places the additional burden of recreating your environment on the helper. ?In this case, the helper is also the person who helped the first time by writing and providing the code that you are using. ?Of course all of this is in the posting guide(s). Best, Jeff On Fri, Jan 28, 2011 at 1:23 PM, Dan N. <exshovelrydr at gmail.com> wrote:
Notice the numbers running up the left hand side of the graph, covering
the
y-axis. ?- using Python rpy2. ?- create charts using Quantmod, example code below robjects.r['pdf'](file=filename) robjects.r['chartSeries'](dataf, subset=subset, theme="white", TA=TA) robjects.r['dev.off']() Any ideas?
_______________________________________________ R-SIG-Finance at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-sig-finance -- Subscriber-posting only. If you want to post, subscribe first. -- Also note that this is not the r-help list where general R questions should go.
-- Jeffrey Ryan jeffrey.ryan at lemnica.com www.lemnica.com
? ? ? ?[[alternative HTML version deleted]]
_______________________________________________ R-SIG-Finance at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-sig-finance -- Subscriber-posting only. If you want to post, subscribe first. -- Also note that this is not the r-help list where general R questions should go.
Jeffrey Ryan jeffrey.ryan at lemnica.com www.lemnica.com
Lol. Jeff you are one bitter person. Sent from my iPhone
On Jan 28, 2011, at 4:19 PM, Jeffrey Ryan <jeffrey.ryan at lemnica.com> wrote:
On Fri, Jan 28, 2011 at 3:09 PM, Dan N. <exshovelrydr at gmail.com> wrote:
Dear Jeffery Ryan,
It's Jeffrey.
I was simply asking if anyone had ideas on why the chart looked this way. Have you seen this before or not? I was not asking for a lecture on mailing list protocol, how to recreate my environment, or any other such nonsense.
To answer your question --- yes, I have seen it before. HTH Jeff
On Fri, Jan 28, 2011 at 3:41 PM, Jeffrey Ryan <jeffrey.ryan at lemnica.com>wrote:
Dan N. You'll need to provide something to make this reproducible. Typically that would be a very **small** example created with random data or dput your data. In addition you'd need to explain what TA is, since I think that might be the issue. Also some additional info like platform, additional things you tried (e.g. running in R - to remove the potential for Rpy to be a cause). You can also try using chart_Series, add_TA, add_BBands and add_Vo to see if that fixes your issue. That is the new version of chartSeries that isn't 'complete', but it is much nicer for most basic things. In general the 'is this broken?' is a non-starter for help, since it places the additional burden of recreating your environment on the helper. In this case, the helper is also the person who helped the first time by writing and providing the code that you are using. Of course all of this is in the posting guide(s). Best, Jeff On Fri, Jan 28, 2011 at 1:23 PM, Dan N. <exshovelrydr at gmail.com> wrote:
Notice the numbers running up the left hand side of the graph, covering
the
y-axis. - using Python rpy2. - create charts using Quantmod, example code below robjects.r['pdf'](file=filename) robjects.r['chartSeries'](dataf, subset=subset, theme="white", TA=TA) robjects.r['dev.off']() Any ideas?
_______________________________________________ R-SIG-Finance at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-sig-finance -- Subscriber-posting only. If you want to post, subscribe first. -- Also note that this is not the r-help list where general R questions should go.
-- Jeffrey Ryan jeffrey.ryan at lemnica.com www.lemnica.com
[[alternative HTML version deleted]]
_______________________________________________ R-SIG-Finance at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-sig-finance -- Subscriber-posting only. If you want to post, subscribe first. -- Also note that this is not the r-help list where general R questions should go.
-- Jeffrey Ryan jeffrey.ryan at lemnica.com www.lemnica.com