On Apr 12, 2016, at 9:20 AM, Ivan Calandra <ivan.calandra at univ-reims.fr> wrote:
Thanks a lot John.
I had tried, but only with the whole Editor window, not trying to extract single tabs from the Editor window...!
Ok, I think I'll switch to RStudio then, but still, the Mac R Editor is great ;)
Ivan
--
Ivan Calandra, PhD
University of Reims Champagne-Ardenne
GEGENAA - EA 3795
CREA - 2 esplanade Roland Garros
51100 Reims, France
+33(0)3 26 77 36 89
ivan.calandra at univ-reims.fr
--
https://www.researchgate.net/profile/Ivan_Calandra
https://publons.com/author/705639/
Le 12/04/2016 15:56, John Magnotti a ?crit :
Hi Ivan,
The latest version of RStudio does allow for at least the Source Editor windows to be popped out of the main RStudio window. And you can create a new graphics device (dev.new()) which effectively pops the graph window out as well. I've found multiple sources windows + graph windows on one monitor and the rest of RStudio on another monitor is reasonably close to my workflow with R.app.
take care,
John
On Tue, Apr 12, 2016 at 8:53 AM, Ivan Calandra <ivan.calandra at univ-reims.fr <mailto:ivan.calandra at univ-reims.fr>> wrote:
Thank you Mollie and all,
So it looks like there's no way to properly use chunks within the
Mac R GUI.
I will have to decide whether I completely switch to RStudio, or
develop in the R GUI and then run in RStudio.
Still, until now I was a great fan of the R GUI on Mac so I'm a
bit frustrated. It would be great if this feature were integrated
to the R GUI some day! Alternatively, a better GUI for RStudio
allowing for multiple screens would be fine too (but that's for
another list!).
Bests,
Ivan
--
Ivan Calandra, PhD
University of Reims Champagne-Ardenne
GEGENAA - EA 3795
CREA - 2 esplanade Roland Garros
51100 Reims, France
+33(0)3 26 77 36 89 <tel:%2B33%280%293%2026%2077%2036%2089>
ivan.calandra at univ-reims.fr <mailto:ivan.calandra at univ-reims.fr>
--
https://www.researchgate.net/profile/Ivan_Calandra
https://publons.com/author/705639/
Le 12/04/2016 15:05, Mollie Brooks a ?crit :
Hi Ivan,
Using the R GUI and the built-in editor, you should be able to
format your document in the standard Rmarkdown or knitr way
and save it with the appropriate extension (Rmd or Rnw), but
only run lines within chunks in the console (using command +
enter in the normal way). You can make sure all the chunks are
working in that way. Then to format the whole document you can
use a command in the Terminal as described in the links Tom
sent or reopen the document in Rstudio.
Somehow my R GUI can?t find the right pieces to make the pdf,
so I have to use the Terminal. render("EstObsErr.Rmd")
produces the error
/usr/local/bin/pandoc EstObsErr.utf8.md
<http://EstObsErr.utf8.md> --to latex --from
markdown+autolink_bare_uris+ascii_identifiers+tex_math_single_backslash-implicit_figures
--output EstObsErr.pdf --template
/Library/Frameworks/R.framework/Versions/3.2/Resources/library/rmarkdown/rmd/latex/default-1.14.tex
--highlight-style tango --latex-engine pdflatex --variable
'geometry:margin=1in'
pandoc: pdflatex not found. pdflatex is needed for pdf output.
Error: pandoc document conversion failed with error 41
cheers,
Mollie
------------------------
Mollie Brooks, PhD
Postdoctoral Researcher, Population Ecology Research Group
Department of Evolutionary Biology & Environmental Studies,
University of Z?rich
http://www.popecol.org/team/mollie-brooks/
On 12Apr 2016, at 12:57, Ivan Calandra
<ivan.calandra at univ-reims.fr
<mailto:ivan.calandra at univ-reims.fr>
<mailto:ivan.calandra at univ-reims.fr
<mailto:ivan.calandra at univ-reims.fr>>> wrote:
Thank you for your answer.
I don't usually use the Terminal, so I'm not sure how to
do it.
But do you mean to start it from the Terminal and then use
the R GUI or do everything in the Terminal? In the latter
case, I would prefer using RStudio... My question was
about using the R GUI Editor rather than RStudio.
Ivan
--
Ivan Calandra, PhD
University of Reims Champagne-Ardenne
GEGENAA - EA 3795
CREA - 2 esplanade Roland Garros
51100 Reims, France
+33(0)3 26 77 36 89 <tel:%2B33%280%293%2026%2077%2036%2089>
ivan.calandra at univ-reims.fr
<mailto:ivan.calandra at univ-reims.fr>
<mailto:ivan.calandra at univ-reims.fr
<mailto:ivan.calandra at univ-reims.fr>>
--
https://www.researchgate.net/profile/Ivan_Calandra
https://publons.com/author/705639/
Le 12/04/2016 11:41, Tom Hopper a ?crit :
Ivan,
You need to run knitr manually from the terminal
(RStudio automates this with the ?knit? button). See
http://joshldavis.com/2014/04/12/beginners-tutorial-for-knitr/
http://kbroman.org/knitr_knutshell/pages/Rmarkdown.html
for short tutorials on using knitr from the terminal.
Regards,
Tom
On 201604 12, at 05:15, Ivan Calandra
<ivan.calandra at univ-reims.fr
<mailto:ivan.calandra at univ-reims.fr>
<mailto:ivan.calandra at univ-reims.fr
<mailto:ivan.calandra at univ-reims.fr>>> wrote:
Dear Mac useRs,
A colleague of mine have introduced me to
rmarkdown and knitr to produce nice reports. The
other interesting thing here is to have so-called
chunks of code, which I find very practical to
organize scripts.
I have found that it works well within RStudio.
But is there a way to enable chunks within the R
GUI (and its great editor)?
What I don't like with RStudio (except that I need
to install still another software, and place is
limited on the 256GB SSD of my MacBook Air) is
that it is not able to work on multiple screens.
Thank you in advance for your help.
Ivan
-- Ivan Calandra, PhD
University of Reims Champagne-Ardenne
GEGENAA - EA 3795
CREA - 2 esplanade Roland Garros
51100 Reims, France
+33(0)3 26 77 36 89
<tel:%2B33%280%293%2026%2077%2036%2089>
ivan.calandra at univ-reims.fr
<mailto:ivan.calandra at univ-reims.fr>
<mailto:ivan.calandra at univ-reims.fr
<mailto:ivan.calandra at univ-reims.fr>>
--
https://www.researchgate.net/profile/Ivan_Calandra
https://publons.com/author/705639/