[R-meta] "Categorical" moderator varying within and between studies

Yes, it?s general and also applies outside the context of meta-analysis.
See for example Raudenbush & Bryk (2002) for a good discussion on centering
and contextual effects in hierarchical linear models.

On Jun 6, 2020, at 11:07 PM, Simon Harmel <sim.harmel at gmail.com> wrote:

Many thanks James. A quick follow-up. The strategy that you described is a
general, regression modeling strategy, right? I mean even if we were
fitting a multi-level model, the fixed-effects part of the formula had to
include the same construction of (i.e., *b1 (% female-within)_ij + b2 (%
female-between)_j*) in it?

Thanks,
Simon

On Thu, Jun 4, 2020 at 9:42 AM James Pustejovsky <jepusto at gmail.com>
wrote:

Hi Simon,

Please keep the listserv cc'd so that others can benefit from these
discussions.

Unfortunately, I don't think there is any single answer to your
question---analytic strategies just depend too much on what your research
questions are and the substantive context that you're working in.

But speaking generally, the advantages of splitting predictors into
within- and between-study versions are two-fold. First is that doing this
provides an understanding of the structure of the data you're working with,
in that it forces one to consider *which* predictors have within-study
variation and *how much *variation there is (e.g., perhaps many studies
have looked at internalizing symptoms, many studies have looked at
externalizing symptoms, but only a few have looked at both types of
outcomes in the same sample). The second advantage is that within-study
predictors have a distinct interpretation from between-study predictors,
and the within-study version is often theoretically more
interesting/salient. That's because comparisons of effect sizes based on
within-study variation hold constant other aspects of the studies that
could influence effect size (and that could muddy the interpretation of the
moderator).

Here is an example that comes up often in research synthesis projects.
Suppose that you're interested in whether participant sex moderates the
effect of some intervention. Most of the studies in the sample are of type
A, such that only aggregated effect sizes can be calculated. For these type
A studies, we are able to determine a) the average effect size across the
full sample (pooling across sex) and b) the sex composition of the sample
(e.g., % female). For a smaller number of studies of type B, we are able to
obtain dis-aggregated results for subgroups of male and female
participants. For these studies, we are able to determine a) the average
effect size for males and b) the average effect size for females, plus c)
the sex composition of each of the sub-samples (respectively 0% and 100%
female).

Without considering within/between variation in the predictor, a
meta-regression testing for whether sex is a moderator is:

Y_ij = b0 + b1 (% female)_ij + e_ij

The coefficient b1 describes how effect size magnitude varies across
samples that differ by 1% in the percent of females. But the estimate of
this coefficient pools information across studies of type A and studies of
type B, essentially assuming that the contextual effects (variance
explained by sample composition) are the same as the individual-level
moderator effects (how the intervention effect varies between males and
females).

Now, if we use the within/between decomposition, the meta-regression
becomes:

Y_ij = b0 + b1 (% female-within)_ij + b2 (% female-between)_j + e_ij

In this model, b1 will be estimated *using only the studies of type B*,
as an average of the moderator effects for the studies that provide
dis-aggregated data. And b2 will be estimated using studies of type A and
the study-level average % female in studies of type B. Thus b2 can be
interpreted as a pure contextual effect (variance explained by sample
composition). Why does this matter? It's because contextual effects usually
have a much murkier interpretation than individual-level moderator effects.
Maybe this particular intervention has been tested for several different
professions (e.g., education, nursing, dentistry, construction), and
professions that tend to have higher proportions of females are also those
that tend to be lower-status. If there is a positive contextual effect for
% female, then it might be that a) the intervention really is more
effective for females than for males or b) the intervention is equally
effective for males and females but tends to work better when used with
lower-status professions. Looking at between/within study variance in the
predictor lets us disentangle those possibilities, at least partially.

James

On Wed, Jun 3, 2020 at 9:27 AM Simon Harmel <sim.harmel at gmail.com> wrote:

Indeed that was the problem, Greta, Thanks.

But James, in meta-analysis having multiple categorical variables each
with several levels is very pervasive and they often vary both within and
between studies.

So, if for each level of each of such categorical variables we need to
do this, this would certainly become a daunting task in addition to making
the model extremely big.

My follow-up question is what is your strategy after you create
within and between dummies for each of such categorical variables? What are
the next steps?

Thank you very much, Simon

p.s. After your `robu()` call I get: `Warning message: In
sqrt(eigenval) : NaNs produced`

On Wed, Jun 3, 2020 at 8:45 AM Gerta Ruecker <
ruecker at imbi.uni-freiburg.de> wrote:

Simon

Maybe there should not be a line break between "Relative and Rating"?

For characters, for example if they are used as legends, line breaks
sometimes matter.

Best,

Gerta

Am 03.06.2020 um 15:32 schrieb James Pustejovsky:

I'm not sure what produced that error and I cannot reproduce it. It

may

have to do something with the version of dplyr. Here's an alternative

way

to recode the Scoring variable, which might be less prone to

versioning

differences:

library(dplyr)
library(fastDummies)
library(robumeta)

data("oswald2013")

oswald_centered <-
   oswald2013 %>%

   # make dummy variables
   mutate(
     Scoring = factor(Scoring,
                      levels = c("Absolute", "Difference Score",

"Relative

Rating"),
                      labels = c("Absolute", "Difference",

"Relative"))

   ) %>%
   dummy_columns(select_columns = "Scoring") %>%

   # centering by study
   group_by(Study) %>%
   mutate_at(vars(starts_with("Scoring_")),
             list(wthn = ~ . - mean(.), btw = ~ mean(.))) %>%

   # calculate Fisher Z and variance
   mutate(
     Z = atanh(R),
     V = 1 / (N - 3)
   )


# Use the predictors in a meta-regression model
# with Scoring = Absolute as the omitted category

robu(Z ~ Scoring_Difference_wthn + Scoring_Relative_wthn +
        Scoring_Difference_btw + Scoring_Relative_btw,
      data = oswald_centered, studynum = Study, var.eff.size = V)

On Tue, Jun 2, 2020 at 10:20 PM Simon Harmel <sim.harmel at gmail.com>

wrote:

Many thanks, James! I keep getting the following error when I run

your

code:

Error: unexpected symbol in:
"Rating" = "Relative")
oswald_centered"

On Tue, Jun 2, 2020 at 10:00 PM James Pustejovsky <jepusto at gmail.com

wrote:

Hi Simon,

The same strategy can be followed by using dummy variables for each
unique level of a categorical moderator. The idea would be to 1)

create

dummy variables for each category, 2) calculate the study-level

means of

the dummy variables (between-cluster predictors), and 3) calculate

the

group-mean centered dummy variables (within-cluster predictors).

Just like

if you're working with regular categorical predictors, you'll have

to pick

one reference level to omit when using these sets of predictors.

Here is an example of how to carry out such calculations in R,

using the

fastDummies package along with a bit of dplyr:

library(dplyr)
library(fastDummies)
library(robumeta)

data("oswald2013")

oswald_centered <-
   oswald2013 %>%

   # make dummy variables
   mutate(
     Scoring = recode(Scoring, "Difference Score" = "Difference",
"Relative Rating" = "Relative")
   ) %>%
   dummy_columns(select_columns = "Scoring") %>%

   # centering by study
   group_by(Study) %>%
   mutate_at(vars(starts_with("Scoring_")),
             list(wthn = ~ . - mean(.), btw = ~ mean(.))) %>%

   # calculate Fisher Z and variance
   mutate(
     Z = atanh(R),
     V = 1 / (N - 3)
   )


# Use the predictors in a meta-regression model
# with Scoring = Absolute as the omitted category

robu(Z ~ Scoring_Difference_wthn + Scoring_Relative_wthn +
Scoring_Difference_btw + Scoring_Relative_btw, data =

oswald_centered,

studynum = Study, var.eff.size = V)


Kind Regards,
James

On Tue, Jun 2, 2020 at 6:49 PM Simon Harmel <sim.harmel at gmail.com>

wrote:

Hi All,

Page 13 of *THIS ARTICLE
<

https://cran.r-project.org/web/packages/robumeta/vignettes/robumetaVignette.pdf

*

  (*top of the page*) recommends that if a *continuous moderator

*varies

both within and across studies in a meta-analysis, a strategy is

to break

that moderator down into two moderators by:

*(a)* taking the mean of each study (between-cluster effect),

*(b)* centering the predictor within each study (within-cluster

effect).

BUT what if my original moderator that varies both within and

across

studies is a *"categorical" *moderator?

I appreciate an R demonstration of the strategy recommended.
Thanks,
Simon

         [[alternative HTML version deleted]]

      [[alternative HTML version deleted]]

--

Dr. rer. nat. Gerta R?cker, Dipl.-Math.

Institute of Medical Biometry and Statistics,
Faculty of Medicine and Medical Center - University of Freiburg

Stefan-Meier-Str. 26, D-79104 Freiburg, Germany

Phone:    +49/761/203-6673
Fax:      +49/761/203-6680
Mail:     ruecker at imbi.uni-freiburg.de
Homepage: https://www.uniklinik-freiburg.de/imbi.html